Table of Contents
Advertisement
Keep all packing materials until the unit has been inspected.
z
Inspect the product to ensure there is no shipping damage. If any damage is detected
z
contact the dealer or retailer you bought the product from to report the damage.
Fisher & Paykel is not responsible for shipping damage.
z
1
2
3
UNPACK PRODUCT
Cut the straps, lift the top cap
off and cut down the side of the
carton to remove. Dispose of
packaging responsibly.
Remove all pre packaged parts and set
aside. Do not discard.
Push the grille flap to open and unscrew
the 2 screws behind the flap and 5 on
the grille. Set screws aside. Open the
door and pull the grille outwards from
the product.
4
5
6
7
Using a Phillips screwdriver, unscrew
the transit brackets from one side of the
product and set aside.
Check levelling feet have been raised,
tilt product and insert handtruck.
Restrain product to handtruck.
We recommend using the corner
posts to protect the product when
using restraints.
Remove the two remaining
transit brackets.
Tilt product onto handtruck and
remove palette. Move product to the
installation location.
Remove and discard corner posts.
17
Advertisement
Table of Contents
