DIY CREW PAPER ROLL CUTTER Assembly Instruction page 2

Assembly instruction
STEP 1
Connect the metal rods to the base
Use 4 screws (#1) and a
screwdriver to connect them.
STEP 3
Put the dowel in place
Check if the dowel ts in place
and install the paper roll
NOTE: Please contact us if there are missing pieces
STEP 2
Connect the blade to the arms
Use 2 small screws (#2) and a
screwdriver to adjust them.
Note:
The blade's tab should be inserted
inside the arm's slot. The cutting
edge should face the table
@ .
INFO DIYCREW CO