M-Triangel M1 Operating Instruction page 5

1.参数设置
2.1.Check setting on the screen
查看液晶屏上的参数，出厂默认参数为除泡温度：40℃，除泡时间：30 秒
Laminating temperature: 40℃; Vacuum time: 30s; Laminating time: 30s;
Defoaming temperature: 40℃.
*没有特殊要求，请勿擅自调试参数，如需更改参数，请联系厂家售后。
.*Attention: This is factory settings, please don't adjust it by
yourself.
2.把屏幕放入仓门，排线放在下方。
2.Put the screen into the door, the cable on the bottom