Page 1
Rim locks Rim locks User Manual User Manual ND-S Series ND-S S200, S201, S220 S200, S201, S220 A non-key door lock may be partially broken to open the door when it malfunctions. Retain this user manual for future reference after reading it...
Safety Precautions ㆍ Read this manual carefully and use the product accordingly. ㆍ This product was designated for the residential fire door, if it is used for other purpose, the performance cannot be warranted for its original purpose. ㆍ Long-term exposure to direct sunlight, to moisture or to salinity may cause deformation of the product.
Parts Name ● Outer body General Model Fingerprint Model Fingerprint Reading Panel (only for applied models) Numeric Touch Plate Card Key Touch Plate Emergency Power Supply Terminal ● Inner body button Thumb Turn button Horizontal type Dead bolt Batteries Sub latch bolt Vertical type [OPEN/CLOSE] button Battery cover locking screw...
PIN-codes Activation/Deactivation ● PIN-codes Activation only applied S220 model Open the battery cover, press the Open the battery cover, button shortly. When the numeric press the button shortly. When the Numeric touch touch plate is on, enter the registered plate is on, enter the registered PIN-code with the PIN-code with the [ ] button.
Card keys Activation/Deactivation ● Card keys Activation Beep Open the battery cover, press the button shortly. When the numeric touch plate is on, enter the registered PIN-code with the [ ] button. Place Card keys only applied S220 model to the Card key Press the number [2].
Remote Controllers Activation/Deactivation ● Remote Controllers Activation ㆍRemote controllers are not provided with a standard package. only applied S220 model Open the battery cover, press the Open the battery cover, button shortly. When the numeric press the button shortly. When the Numeric touch touch plate is on, enter the registered plate is on, enter the registered PIN-code with the PIN-code with the [ ] button.
Fingerprints Activation/Deactivation only for Fingerprint models ● Fingerprint Activation ㆍFingerprint recognition may not be possible if the fingerprint is damaged. ㆍFingerprint recognition may not be possible if sweat or moisture is on the fingerprint or the fingerprint reading panel. ㆍTo raise the recognition rate, we highly recommend you to add same fingerprints in different conditions.
_ 10 Double Authorization Mode Only for models with more than one authorization ● Double Authorization Mode Activation ㆍDouble Authorization Mode requires two different authentications registered to activate. ( e.g. [PIN-code] + [Fingerprint], [PIN-code] + [Card Key] ) Touch the numeric touch plate gently, then the touch plate turns on.
_ 11 _ 11 Pre Authentication Mode ● Pre Authentication Mode Activation ㆍPre Authentication mode is default mode. Please enter the PIN-code first to enter the setting mode. Touch the numeric touch plate gently, then the touch plate turns on. Enter the registered PIN-code.
_ 12 Opening Door / Locking Door ● Opening the door from outside Using PIN-codes Touch the numeric touch plate gently, then the touch plate turns on. Enter the registered PIN-code and then [ ] button. The door will open with a verification sound.
_ 13 Opening Door / Locking Door ● Opening the door from inside Using [OPEN/CLOSE] button Press the [OPEN/CLOSE] button when ▶ the door is locked, the door will open. Using [Thumb turn] button ▶ Turn the [Thumb Turn] button of the inner body clockwise when the door is locked, then the door will open.
_ 14 Safety Lock Mode [Outdoors/Indoors] ● Outdoors ㆍ It is a function to prevent intruders from opening doors by manipulating an internal handle or button. Warning Alarm goes OFF for once. Warning Alarm will be released when the door is opened using the authentication method registered from outside. Activating Safety Lock Mode When the door is locked, touch the numeric touch plate gently, then the touch plate turns on.
_ 15 Automatic/Manual Locking Mode ● Automatic Lock Mode ㆍAutomatic Lock Mode is the default mode. The door is automatically locked when it closes. However, make sure that the door is completely closed when going outside. Press the [OPEN/CLOSE] button to make the dead bolt come out when the door is open.
_ 16 Volume Setting ● Silent Mode ㆍThis is a temporary function not to disturb the neighborhood. Touch the numeric touch plate gently, then the touch plate turns on. Press the [#] button. No sound Enter the registered PIN-code with the [ ] button to open doors. ●...
_ 17 Warning Alarms ● Fire Detection Alarm When the sensor detects high temperature (60℃±5℃), the door will be automatically unlocked with a loud alarm. Fire Detection Alarm Off To deactivate the alarm, remove the battery, enter the registered PIN-codes, place the Card keys to the Card key touch plate or put the registered Fingerprint.
_ 18 Warning Alarms Warning Alarms ● Low Battery If the Low Battery alarm goes OFF, please replace all batteries. Bi-rik Bi-rik Bi-rik Beep Please do not mix old and new batteries. Make sure batteries are placed in correct poles. Emergency Power Use The product will not operate if the batteries are fully discharged, please follow the steps bellow.
_ 19 _ 19 Trouble Shooting Trouble Shooting ● Trouble Shooting When the product is not working properly, check the items below. If you can’t solve the problem, please contact the service center for further assistance. Problem Trouble Shooting ㆍ Make sure the batteries are placed in correct poles(+/-).
Page 20
Scan to play video channel Operation Guide Rim Lock Neurosys Co., Ltd. made in Korea NE v.2.2...
Need help?
Do you have a question about the ND-S Series and is the answer not in the manual?
Questions and answers