Table of Contents
Related Manuals for LAUNDRY JET Return
Summary of Contents for LAUNDRY JET Return
- Page 1 NSTALLATION UIDE Laundry Jet Return September 2021 Version 1.0 Revision 0.1 Rev 4 Return Units for use with ISense & ISlide Laundry Jet 2001 Challenger Avenue Oroville, CA 95965 +1.800.867.4580 sales@laundryjet.com www.laundryjet.com...
- Page 2 INSTALLATION GUIDE +1.800.867.4580 sales@laundryjet.com www.laundryjet.com...
- Page 3 INSTALLATION GUIDE Document Revisions Version Date Document Changes Number 9/17/2021 1.0 Rev 0.1 Laundry Jet Installation Guide Rev 1 +1.800.867.4580 sales@laundryjet.com www.laundryjet.com...
-
Page 4: Table Of Contents
4 - Components & Tools 4.1 - Pipe Installation Standards 4.2 - Port Drop Installation 4.3 - Port 90 Installation 4.4 - Return Unit Pipe Drop Return Unit Installation 13-14 5 - Components & Tools 5.1 - Return Unit Installation Warranty +1.800.867.4580... - Page 5 ▪ Vacuum Laundry Pipe Laundry Jet specifies 6" SDR35 White Solvent Weld PVC pipe and fittings. This piping is light weight to make install quick and easy. PVC piping is designed to have a smooth transition in between fittings and connections which ensures that clothing, bedding and towels will travel smoothly to the laundry room.
- Page 6 ▪ It is connected into the pipe network as illustrated above. ▪ The top right hand entry of the Return Unit connects via pipe to a dedicated port in the ▪ laundry room. The top left hand entry of the Return Unit connects the suction airflow of the main pipe run.
- Page 7 Contents 3 Contents Laundry Jet Return Unit Hardware Kit Pipe Components All Fittings are 6" SDR35 White Solvent Weld 6 Inch Wye 6 Inch 45° Elbow 6 Inch Coupler 6 Inch Cleanout 6 Inch Swept 90° +1.800.867.4580 sales@laundryjet.com www.laundryjet.com...
-
Page 8: Pipe Installation Overview
Components & Tools 4 Pipe Installation Overview Components Port 90 Assembly 6 Inch Wye 6 Inch Cleanout Adapter 6 Inch 45° Elbow Cable Bundle Tools Cordless Drill Sawzall Tape Measure Clear 2 Part PVC Glue 1" Wood Screw Plumber's Metal Strapping Tape +1.800.867.4580 sales@laundryjet.com www.laundryjet.com... -
Page 9: Pipe Installation Standards
Pipe Installation Standards 4.1 Pipe Installation Overview Pipe Installation Standards Required Piping Installation Standards All joints must use a minimum entry angle of 45 degrees with a break distance of 18 Inches ▪ (460 MM). See Image below. Pipe cuts must be straight and de burred before seating. ▪... -
Page 10: Port Drop Installation
Port Drop Installation 4.2 Pipe Installation Overview Port Drop Installation Mount port 90 using the Port 90 Mount Bracket. See Page 11 for Port 90 Installation. Use a ▪ standard SDR 6" Swept 90 for your Port Drop Installation. Block and strap drop line at midway point +1.800.867.4580 sales@laundryjet.com... -
Page 11: Port 90 Installation
Port 90 Installation 4.3 Pipe Installation Overview Port 90 Installation Port 90 must be installed with front face of Port 90 flush with the finished face of interior ▪ wall. Port 90 must be installed on a plum horizontal port drop line. ▪... -
Page 12: Return Unit Pipe Drop
Return Unit Pipe Drop Directly above your return unit on the ceiling use pipe drop template to cut hole positions in ▪ the ceiling. Install a standard swept 90 drop to each port using a swept 90 elbow. -
Page 13: Return Unit Installation
Return Unit Installation 5 Return Unit Installation Components Laundry Jet Return Unit Hardware Kit Tools Cordless Drill Stud Finder Level +1.800.867.4580 sales@laundryjet.com www.laundryjet.com... -
Page 14: Return Unit Installation
Mark your mount hole position for predrill at .25" (6.5mm) Predrill your mount holes to 3" (76mm) ▪ Using a socket drive on your drill, set the return unit into position and install the 4 provided 1/4"x 3" Lag screws. -
Page 15: Warranty
Lifetime Limited Warranty Laundry Jet is protected by a 3 year limited lifetime warranty. This warranty is valid from the date of purchase, for as long as you are the original owner, the system remains at its original place of installation and as long as the warranty form has been completed and submitted on our website: http://www.laundryjet.com/warranty...
Need help?
Do you have a question about the Return and is the answer not in the manual?
Questions and answers