Table of Contents
Advertisement
Please read and follow the safety instruction carefully before you
use YEOSEN vacuum preservation system
1.Please check if the local power supply voltage matches the voltage
indicated on this appliance before use.
2.Do not operate the appliance with a damaged power cord or plug. Do
not operate the appliance if there's any malfunctions or damage of the
product . if the cord or the appliance is damaged ,it must be returned to
an authorized service center.
3.To disconnect the power, unplug the power cord from the electrical
outlet. Do not disconnect by pulling on the power cord.
4.If the supply cord is damaged, it must be replaced by the manufacturer,
or it's service agent or similarly qualified person in order to avoid a
hazard.
5.Do not use an extension cord with the appliance.
6.When the appliance is not in use or need to be clean, please unplug
cord from the power outlet first.
7.Do not use the appliance on wet or hot surfaces, or near a power source.
8.Do not immerse any part of the appliance, power cord or plug in water
or other liquid.
9.Use only accessories or attachments recommended by the manufacture.
10.Use the appliance only for it's intended use. Don't use the product
outside the work area.
11.Close supervision is required when children use the appliance. Do not
play with the appliance as a toy.
12.Intervals for 40 seconds is recommended every time after seal.
03
SAFEGUARDS & TIPS
SAFEGUARDS & TIPS
STRUCTURE AND FUNCTIONS
5
1
2
1-"Mode" button:
it has two setting mode( Normal and Gentle). The
default mode is Normal. When the food is crumbly , you can press the
button, then the vacuum mode is changed to Gentle. You can manually
control the degree of vacuum by pressing "Seal" button at any time,
the food will be sealed automatically. ( Note: if the power is interrupted,
this setting will return to a preset standard mode).
2-"Food"button: it has two setting mode
mode is Dry, when you press the button, it change to Moist model.
You can choose the model according to the food type.
3-"Seal"button( with LED): Press this button to seal bag
for 40 seconds is recommended each time)
4-"Vac/Seal"button:
Press this bottom to vacuum and seal bag
( intervals for 40 seconds is recommended each time)
5-"Stop" button:
allow user to stop working anytime
3
4
(
Dry and Moist
).
The default
(
intervals
04
Advertisement
Table of Contents
