Advertisement
PAM-CDA
Front Panel Controls
1. Disc Access Slot
Insert a CD into this slot with the label facing up, and the disc is automatically
loaded. Playback begins with the first track on the CD.
2. Top Switch
This switch is used to play the first track on the CD. Scan, repeat and random play
functions are cleared when this switch is pressed.
3. Random Play Switch
This switch is used to select playback of the tracks on the CD in random order.
When the switch is pressed, RDM will appear in the display (7). After the current
track has played, subsequent tracks will be selected in random order. Pressing the
switch again, or pressing the Top Switch (2), clears Random mode.
4. Music Scan Switch
This switch is used to play the first 10 seconds of each track in succession. It is
useful when searching for a specific track on a CD. When the switch is pressed,
SCAN will appear in the display, and the track number display will reflect the next
upcoming track.
Pressing this switch again, or pressing the Top Switch (2) will clear Scan mode,
allowing the currently selected track to play through to the end.
5. Repeat Switch
This switch is used to select Repeat mode, where the current track will play
continuously. Pressing this switch again, or pressing the Top Switch (2), will cancel
Repeat mode.
6
Compact Disc Module
Advertisement
