Page 1
KWFOR1 FORD TRANSIT CUSTOM (FCC) 2012-2016 INSTALLATION MANUAL V1.0321 This dash image is a visual representation for display purposes only. The information provided in this document is subject to change without notice due to changes and/or improvements to the product/s.
The KWFOR1 installation kit allows for the retention of the vehicle’s steering wheel controls and helps maintain the original aesthetic of the interior when installing a new car stereo. The KWFOR1 gives you everything you need for a complete install in one box. The components of this kit are compatible for the Ford Transit-Custom (FCC, 2012-2016) with Visteon factory stereos.
Page 3
FITTING GUIDE STEREO REMOVAL 1. Unclip the top cover using a panel removal tool. This will uncover 2x torx screws atop the main radio. Undo these screws and using a panel tool, begin to pry the panel out of the dashboard, disconnecting the wiring in the process.
Page 4
FITTING GUIDE STEREO INSTALLATION 1. Take the steering wheel control interface in hand and connect both the 12-way stereo patch lead and the 14-way steering wheel harness connectors to the corresponding sides. 2. Connect the bullet connector from the stereo patch lead to the ‘steering wheel remote input’ on the back of the new stereo.
TECHNICAL ASSISTANCE If at any point you experience any problems and need any assistance before, during or after the installation process, please contact us via : Phone: 01420 470 605 E-Mail: help@topvehicletech.com Mon - Fri 9am - 5.30pm GMT If you would like to download a digital copy of this manual, or any other product, then please visit the www.topvehicletech.com website.
Need help?
Do you have a question about the KWFOR1 and is the answer not in the manual?
Questions and answers