Quick Set-Up - Mycle Cruiser Pro Manual

Mycle Quick Set Up
Quick
Set-up
Before you ride,
make sure your scooter
is correctly set up.
8
Scooter Assembly
After removing the scooter from
the box, place it on flat ground.
Open kick stand.
1
Connect the waterproof
2
cable between the handlebar
assembly and folding stem.
Insert the handlebar assembly
3
into the folding stem.
4 Lift the stem and lock
the folding safety lever.
Hearing a 'click' means
the stem is locked
in place.
Headset assembly
Secure the handlebar assembly
5
to the folding stem with the
allen key and four screws
provided.
NOTE : First insert the four
screws in sequence from hole
to hole and finally tighten
them together.
Mycle Quick Set Up
4
3
2
1
Power on testing
Perform testing after installation
Power on inspection
1
Gear shift inspection
2
3 Front headlight inspection
4 Braking force inspection
9