Installing The Intellinav 3 In Your Vehicle - Intellinav 3 Quick Start Manual

Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd

Installing the Intellinav 3 in your vehicle

Mounting on the Windshield
1. Clean the surface of the windshield using rubbing alcohol.
2. Press the suction cup firmly against the windshield.
3. Press down the lever to fix the suction cup in place.
NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA:
State law prohibits drivers in California (CVC 26708(a)) and
Minnesota (169.71, Minnesota Statutes 2006) from using
suction mounts on their windshields while operating motor vehicles.
Mounting on the Dashboard
1. Remove the adhesive cover on the disc, and stick the
disc on the dashboard.
2. Press the suction cup firmly against the disc.
3. Press down the lever to fix the suction cup in place.
Mounting the Cradle and GPS
1. Insert the GPS unit bottom in first, and then lock it using
the lever on the top.
2. Adjust the angles of the arms to achieve the best viewing
position.
4
2007/8/20 ⁄U⁄¨