Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd Safety warnings When using the Intellinav 3, make sure you are operating the device in compliance with all local, state, and federal regulations. It is the sole responsibility of the driver of the vehicle to operate the vehicle in a safe manner and not become distracted by the Intellinav system .
Windshield Mount AC Adapter Car Charger Warranty Card Note: If you are missing any item, please contact your retailer. Quick Start Guide Quick Start Guide (this document) 2GB SD Card (pre-inserted into Intellinav 3) User’ s Manual Disc Pouch 2007/8/20 ⁄U⁄¨...
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd Installing the Intellinav 3 in your vehicle Mounting on the Windshield Clean the surface of the windshield using rubbing alcohol. Press the suction cup firmly against the windshield. Press down the lever to fix the suction cup in place.
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd Charging the Battery Prior to first use, please use the AC adapter to fully charge the unit for 4-6 hours, until battery LED turns green. In the vehicle, you may plug in the car charger to provide continuous power. On a full charge, the unit can operate between 2 to 3 hours.
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd 2007/8/20 ⁄U⁄¨ Getting to know the Intellinav 3 Reset Button Battery On/Off *DC In Standby Headphone Jack SD Card Slot Speaker (rear) Volume (+/-) *The USB feature has been disabled...
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd Starting the Intellinav 3 for the first time To start the Intellinav system: Press the <<Standby>> button. The Main Menu screen appears. If the Battery On/Off switch on the bottom of the unit is in the Off position, set it to On first.
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd Getting GPS signal To use the Intellinav 3 to guide you to a destination, the system's GPS antenna must be receiving signals. GPS signals can be obstructed by ceilings, trees, heavy clouds, and nearby tall buildings. Signals can also be obstructed by the roof of your vehicle and UV filtering windshield.
The bottom of the screen displays the name of the street you are on, and your current speed. The Intellinav map shows you more than just your current location. As you navigate to a destination, the map displays the direction of...
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd 2007/8/20 ⁄U⁄¨ Entering data on the Intellinav 3 When the system requires that you enter data, a screen of alphabets appears. You can then enter data by tapping these screen buttons. As you tap the buttons on the keyboard, the...
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd Entering a route There are six different ways to set your destination. In this guide we'll just show you how to enter an address, starting with the street name, and let you explore from there. To enter an address as a destination: Tap Menu.
Page 13
Note: If for some reason you cannot follow an instruction from the guidance directions, the Intellinav 3 will automatically recalculate your route and provide new directions. Other ways to enter your route The other ways to enter your route include:...
Provides information related to the sun and the moon, and based on geographic location. System Information Provides software revision number and copyright information. GPS Information Provides information related to GPS signal strength, coordinates, date and time. Quick Start Guide 2007/8/20 ⁄U⁄¨...
170,000 miles of primary and secondary roads across major US cities. Historical observations from GPS probe data are aggregated and verified to provide higher quality routing based on likely traffic flow at the time of your departure, especially during times of...
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd Using tools To calculate the arrival or departure time: Set a destination first. (see Planning a route) Tap Menu. The main menu appears. Tap Tools. The Tools screen appears. Tap Departure Time or Arrival Time. The Day and Time screen appears.
Page 17
To save your parking location: Press the Standby button on the top of Intellinav 3, after you have parked your car. Take the Intellinav 3 with you.
( Head-light Reminder 15 minutes after sunset, you will be reminded to turn on your head-lights. Sunset time is automatically calculated, based on your GPS location. Quick Start Guide...
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd Other features You can customize the features of the Intellinav 3 to make your navigation experience even better. The options you have include: Route options Display options Language Options Localization Options 2007/8/20 ⁄U⁄¨...
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd 2007/8/20 ⁄U⁄¨ Additional information All the features of your Intellinav 3 are fully explained in the User's Manual included. For complete information please refer to it. *NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law from these states prohibits drivers of any motor vehicle from placing, displaying, affixing and or applying any objects such as suction mounts on the windshields.
Page 23
Intellinav3_Quick_Start_Guide_20070820:QSG_IN-KQG02_112706.qxd 2007/8/20 ⁄U⁄¨ Netropa Corporation 1499 Huntington Dr. Suite 305 South Pasadena, CA 91030 Office 888.628.0663 http://www.intellinav.com...