Related Manuals for Intellinav UM_IN-KIG02-112706.QXD
Summary of Contents for Intellinav UM_IN-KIG02-112706.QXD
- Page 1 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 2...
-
Page 2: Table Of Contents
Mounting the Intellinav System ....5 Starting Intellinav ......6 Getting GPS Signal . - Page 3 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Shuffle Mode ......43 Repeat Mode ......43 Playback Volume .
-
Page 4: Getting Started
Page 5 UV-protected Windshield UV-protected windshield in certain vehicles reflects UV- rays as well as satellite signals. Although the Intellinav 3 is equipped with SiRF’ s high sensitivity GPS receiver, the acquisition time is drastically affected. It is not recommended to use Intellinav 3 in vehicles with UV- protected windshield. -
Page 5: Basic Operation
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 6 Basic Operation Reset Button Battery On/Off *DC In Standby Headphone Jack Speaker (rear) Volume (+/-) SD Card Slot *The USB feature has been disable... -
Page 6: Mounting The Intellinav System
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Mounting on the Windshield Clean the surface of the windshield using rubbing alcohol. Press the suction cup firmly against the windshield. Press down the lever to fix the suction cup in place. NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law prohibits drivers in California (CVC 26708(a)) and Minnesota (169.71, Minnesota... -
Page 7: Starting Intellinav
The map view appears and you are ready to set your first destination! Getting GPS Signal To use the Intellinav system to guide you to a destination, the system's GPS antenna must receive GPS signals. GPS signals can be obstructed by ceilings, trees, and nearby tall buildings. -
Page 8: Gps Information
Moving Through the Screens The Intellinav system shows you one screen at a time. Each time you tap a button, a new screen appears. If you want to return to go to the previous screen, tap in the upper right corner of the screen. -
Page 9: Working With The Map
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Working with the Map The Intellinav system gives you many ways of looking at the map. You can see your current position, view any of the turns on a route, or pan the map to view other areas. You can zoom in and out, and find information about specific locations. -
Page 10: 3D Map View
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 3D Map View You can change the perspective of the map display to 3D or bird’ s eye view. To change to 3D view: 1. Tap Menu. The Main Menu appears. 2. Tap Settings. The Settings screen appears. 3. Tap Display Options. The Display Option screen appears. -
Page 11: Poi Information
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd From the Information screen you have several options: Set Start Location Set Stopover (with an existing route) Set Destination Save This Location Information Setting the location as a starting point is useful if you are trying to find the distance between two locations. -
Page 12: Planning Your Route
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Entering Your Route You can set a destination with the Intellinav system many different ways. Once you have set a destination, you can add a detour or a stopover. The Intellinav system also offers an Itinerary feature, where you can enter up to 100 destinations and use the Itinerary screen to re-order destinations as you like. - Page 13 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2. Tap Destination. The Set Destination screen appears. 3. Tap Address. The Input Method screen appears. 4. If you need to change the region: a. Tap Change State. The Enter State Name screen appears. b. Tap the Letters to enter the name of the region or State, or tap the name in the list.
-
Page 14: Using An Intersection As A Destination
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 6. Tap the Letters to enter the name of the City. Tap OK when you have selected the City. The Enter Street Name screen appears. 7. Tap the Letters to enter the name of the street. Tap OK when you have selected the street. The Enter House Number screen appears. - Page 15 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd The Select Address screen appears. 8. Select the intersection that matches the location you want to go to and tap Nav. The map appears, and the guidance directions begin. To enter an intersection as a destination using City First: 1.
-
Page 16: Using A Point Of Interest (Poi) As A Destination
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Using a Point of Interest (POI) as a Destination There are over 6 million points of interest that you can select as a destination. Generally, you choose a category and then choose one of four methods of selecting the specific point of interest. - Page 17 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To select a nearby POI from an alphabetical list: a. Tap Alphabetical. The Enter POI Name screen appears. b. Tap the Letters to enter the name of the POI. c. Tap OK when you have selected the POI. The POI Select...
-
Page 18: Using A Favorite Destination As A Destination
Using a Favorite Destination as a Destination Favorite destinations are locations you add to a list on the Intellinav system. You can add locations to your Favorites list as you set a destination, from the POI(s) screen, and from the Location Information screen. You can then easily select one of these locations as a destination. -
Page 19: Using A Recent Destination As A Destination
Page 20 Using a City Center as a Destination Sometimes you may want to use the Intellinav system to get to a city, but not to a specific location within the city. To do this you select a City Center as a destination. - Page 20 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To select from an alphabetical list: a. Tap Alphabetical. The Enter City Name screen appears. b. Tap the Letters to enter the name of the city. Tap OK when you have selected the city. The City Center screen appears.
-
Page 21: Detours, Avoid Roads, And Stopovers
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Detours, Avoid Roads, and Stopovers The Detour feature will allow you to bypass a certain portion of the route starting at your present position, while avoid road allows you to bypass the entire road. Stopovers are stops you add to a trip to make prior to reaching your destination. -
Page 22: Avoid Road
If you mark a section as unavailable the Intellinav system will calculate a new route that avoids the section you marked. NOTE: You cannot avoid a road if you do not have a current destination. - Page 23 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Stopover Once you have set a destination you can add a stopover. Adding a stopover does not cancel your original destination. Once you reach your stopover, you will be prompted to continue to the original destination. To create a stopover: 1.
-
Page 24: Setting An Itinerary
4. Tap Del to remove a destination from the Itinerary. 5. Tap Go! to start navigating from the first item on the Itinerary. 6. Once you reach a destination in your itinerary, Intellinav will automatically prompt you to proceed to the next destination in the list. Intellinav 3 2007/8/20 ⁄U⁄¨... -
Page 25: Managing Your Favorites List
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Managing Your Favorites List You can edit the destinations you add to your Favorites list to give them descriptive names. You can also remove destinations from your favorites list. To manage your favorites list: 1. Tap Menu. The main menu appears. -
Page 26: Getting Information
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Getting Information To access the Information screen: 1. Tap Menu. The main menu appears. 2. Tap Information. The Information screen appears. 3. Select from the following: Intellinav 3 2007/8/20 ⁄U⁄¨ 03:02 Page 27 Route List Provides detailed turn-by-turn maneuver information of your current route. -
Page 27: Trip Information
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Trip Information Provides information such as average speed and distance traveled. This feature is convenient when you need to keep track of your mileage. Almanac Provides information related to the sun and the moon, based on your current geographic location. -
Page 28: Traffic Pattern
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Traffic Pattern Traffic pattern is a database of typical hour-by-hour traffic speeds on over 170,000 miles of primary and secondary roads across major US cities. Historical observations from GPS probe data are aggregated and verified to provide higher quality routing based on likely traffic flow at... -
Page 29: Using Tools
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Using Tools Arrival and Departure Time Calculation Using Traffic Pattern, you can calculate the arrival and departure time based on traffic condition at certain time of day and day of week. For example, if you want to leave at certain time, you can estimate the time of arrival at your destination. -
Page 30: Parked-Car Locator
To save your parking location: Press the Standby button on the top of Intellinav 3, after you have parked your car. Take the Intellinav 3 with you. -
Page 31: Setting Your Options
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Setting Your Options You can set many different options to customize the Intellinav system and make it work your way. These options include: Route Options Display Options Language Options Localization Options System Options Safety Options Display Options The display options give you control over the appearance of the map. - Page 32 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd icons are displayed. If you choose custom, you can choose which categories of POI icons you want displayed. The color settings control the background color of the map. You can choose from four different colors. The 3D view settings control your view of the map. Off shows you the map in traditional 2D mode.
-
Page 33: Route Options
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Route Options The route options give you control over the navigation of your trip. You can change the following: Method Ferries Toll Roads Carpool Turns There are six method settings. Quickest calculates the route that should take the least amount of time. -
Page 34: Safety Options
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To set your route settings: 1. Tap Menu. The main menu appears. 2. Tap Route Options. The Route Options screen appears. 3. Tap your Method preference: Quickest, Major, Shortest, Local, Pattern or Walking. 4. Tap your Ferries preference: Include or Exclude. - Page 35 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To set the speed alert: a. Tap Auto. A warning appears. b. Tap Confirm to close the warning. c. Tap OK. You return to the map. To set a fixed speed alert: a. Tap Fixed. b. Enter the speed you want to use as a maximum speed.
-
Page 36: Language Options
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Language Options The language options allow you to configure the following: Language TTS (Text-to-Speech) There are six language settings. When you change the language, all of the screen names and controls will be in the selected language. To set your language settings: 1. -
Page 37: Localization Options
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Localization Options The localization options give you control over the settings affected by your location, including: Time Zone Daylight Savings Time Units There are six time zone settings, for all areas of the United States. There are two daylight-savings options, to determine whether or not daylight savings time is currently in effect at your location. -
Page 38: System Settings
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd System Options Screen Calibration This process ensures that when you tap the screen, the item tapped is activated. To calibrate the screen: 1. From the Main Menu, tap on System and then System Info. 2. Tap on Calibration. 3. Tap the center of the cross as it moves around the screen. -
Page 39: Volume
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Tap to set the screen backlight level and enable its auto off function. Tap to adjust the volume level and toggle tapping sound. Tap to set the language option for the system menus. Tap to displays your device's OS Version, GPS F/W, and SW Code Version. -
Page 40: Backlight
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Backlight To set the screen backlight level: 1. Tap -/+ to adjust the screen backlight level. 2. Tap to apply the changes made. To set the screen backlight auto-off function: 1. Tap -/+ next to the Battery and External Power settings. -
Page 41: Factory Reset
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Factory Reset To perform a soft reset: 1. Hold the device securely, and then press the soft reset button on the bottom of your device. To load the factory default setting If you still encounter problems even after soft resetting the device, loading the factory default settings may correct the problems. - Page 42 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd To Reset the GPS: 1. Close the navigation program, if it is currently running, by tapping on Menu in the map display, and then Exit in the navigation Menu screen. 2. Tap System on the Main Menu panel. 3. Tap System Info on the System panel.
-
Page 43: Mp3 Playback
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd MP3 Playback you can use a computer to load MP3 onto an SD card and then load that sd card into the SD card slot located at the side of the system. To open the MP3 Player: 1. Tap MP3 on the Main Menu panel. -
Page 44: Shuffle Mode
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Shuffle Mode Each directory containing supported music files is considered a playlist. You can choose to shuffle the playback sequence to play files in random order. To rearrange the playback sequence: 1. To enable the Shuffle mode, tap An enabled Shuffle mode is indicated by the word "Random"... -
Page 45: Photo Viewer
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Photo Viewer With the Intellinav system, you can keep images of your favorite moments as mobile as you are by using the Photo Viewer. You can use a computer to load pictures onto an sd card and then load that sd card into the SD card slot located at the side of the system. -
Page 46: Full Screen Mode
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Full Screen Mode In Full Screen mode, image files can be viewed in a larger scale. You can also change its orientation angle. To view images in Full Screen mode: 1. Search for the file you want to view. -
Page 47: Slide Show
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Slide Show You have the option to view images in a slide show much like viewing a presentation. Images are adjusted to fit the entire display area and are shown in a 3-second interval. To enable the Slide Show mode: 1. -
Page 48: Safety And Regulation
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Safety and Regulation FCC Declaration of Conformity Tested to comply with FCC standards for home or office This equipment complies with Part 15 of the U.S Federal Communications Commission (FCC) Rules. Operation of this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. -
Page 49: Software License Agreement
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Software License Agreement The mapping and navigation software ("Software") and map data ("Data") is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and Netropa ("LICENSEE"). -
Page 50: Nuance End User License Agreement
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd NUANCE (Text-To-Speech) a. License Grant. Netropa grants to End User a non- exclusive, non-transferable right and license to use the Nuance Software on a single Netropa Product. b. Ownership of Nuance Software. End User acknowledges that NETROPA and its licensors... -
Page 51: Terms And Conditions
Software. Personal Use Only You agree to use this Data together with the Intellinav system for the solely personal, non-commercial purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes. Accordingly, but... - Page 52 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd No Warranty This Data is provided to you "as is," and you agree to use it at your own risk. LICENSEE and its licensors (and their licensors and suppliers) make no guarantee, representation or warranty of any kind, express or...
- Page 53 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd agreement between LICENSEE (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.
-
Page 54: Limited Warranty
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Limited Warranty Netropa (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and condition, be proven defective in material or workmanship within one year from the date of original purchase, such defects will be... -
Page 55: Caring For Your Device
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Caring for your device Please use only the power adapter included in the box and connects to the voltage requirement indicated on the rear panel of the product. Use of any other types of chargers will result in malfunction of the device and void all warranties. -
Page 56: Important Information
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd Important Information When using Intellinav 3, please make sure you are operating the device in compliance with all local, state, and federal regulations. It is the sole responsibility of the driver of the vehicle to operate the vehicle in a safe manner and not become distracted by Intellinav. - Page 57 Other dashboard or friction mounting options should be used. Intellinav does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice.
-
Page 58: System Specifications
Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd System Specifications The Intellinav 3 has the following specifications: SiRF Star III GPS chipset SAMSUNG S3C2412 266Mhz CPU 64 MB NAND flash + 64 MB SDRAM onboard 3.5-inch 16.7M Colors TFT LCD with touch panel SD memory slot for map data, MP3, or photos... - Page 59 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 60 Netropa Corporation 1499 Huntington Dr. Suite 305 South Pasadena, CA 91030 Office 888.628.0663 http://www.intellinav.com...
- Page 60 Intellinav3_User_Manual_20070820:UM_IN-KIG02-112706.qxd 2007/8/20 ⁄U⁄¨ 03:02 Page 1 Copyright © 2007 Netropa Corp. http://www.intellinav.com All rights reserved. Part number#IN-QIG03...