Maintenance And Repair - Zhehan Technology ZH-C110B Instruction Manual

PREPARATION
1. Place the machine in the position shown in the figure below to fully
utilize the machine performance.
2. Take out the water outlet pipe well and connect it to the water outlet port
for connection, and place the water pipe at a height of not more than 4.5
meters. If the water outlet pipe is entangled or in a flat state, it will affect
the smoothness of the water outlet and even cause the machine to not
work properly.
Step 2: Connect
the water pipe to
the faucet and
tighten the water
connector
3. Take out the power cord and insert the power cord plug into the power
socket safely and securely
Step 1: Unscrew the water connec-
tor and set it into the water pipe.
MAINTENANCE & REPAIR
MAINTENANCE
1. Machine surface cleaning
Wipe the machine panel with a soft, slightly damp cloth
2. Filter cleaning
a. Take out the filter
1. Prepare a Phillips screwdriver
2. Unscrew 3 screws and take off
the filter cover
3. Pull out the filter
b. Clean the filter
Use a vacuum cleaner to gently absorb the dust on the surface of the
filter. If the filter is very dirty, use a brush to remove the surface dust.
c. Put the cleaned filter back into the air inlet panel.