Advertisement
PRODUCT ICON
FRONT
HUMIDITY
ADJUSTMENT
SWITCH
AIR INLET
BACK
BACK PANEL
FILTER COVER
UNIVERSAL
WHEEL
GRAVITY
WHEEL
1. Humidity regulation
Adjust the indoor humidity by
setting the desired humidity
through the control panel of the
humidifier. The machine can also
AIR OUTLET
be switched off via the control
panel.
FRONT PANEL
FILTER
2. Automatic defrost
When the room temperature is below 15°C, the heat exchanger freezes during the
dehumidification process. The device will then automatically defrost. The duration of
the defrost process depends on the room temperature. The lower the temperature, the
longer the thawing time.
BACK PANEL
3. Recoverable overload protection switch
Please check whether the overload switch is turned on when starting up, otherwise it
cannot be powered on. It is also protected when the current is too large, and it is turned
on after troubleshooting.
OUTLET
CONNECTOR
POWER CABLE
INSTRUCTIONS
Advertisement
