smania MRWIGGLES Instructions

INSTRUCTIONS
MRWIGGLES REMOTE
CONTROL SNAKE TOY
PACKAGE CONTENTS
•
Snake
•
Remote
•
USB charging cable
•
3 × button battery
TECHNICAL SPECIFICATIONS
•
Snake length: 40 cm
•
Material: ABS
•
Snake power supply: 3.7 V rechargeable
battery
•
Remote power supply: 3 × button battery
COMPONENTS
1. Charging port
2. ON/OFF switch
3. Indicator lights
4. Stop/start movement
5. Left
6. Right
HOW TO USE
•
Charge the snake fully before first use. To
charge its battery, make sure that the snake
is turned OFF, then plug one end of the
included USB charging cable into the snake
and the other end into your computer's
USB port or phone charger. It takes about
30 minutes to fully charge the battery.
Remove the cable before use.
•
Use a screwdriver to open the battery
compartment on the back side of the
remote. Take the three included button
batteries, remove the plastic wrapping, and
insert them into the slot according to the
diagram within the compartment. Close the
compartment and tighten the screw.
•
To use the toy, turn it on by using the
ON/OFF switch on the side.
•
Use the right and left buttons on the
remote to steer the snake.
•
Press the stop/start movement button on
the remote to make the snake slither on its
own. You can still steer the snake in this
mode using the steering button. To make
the snake stop, press the movement button
again.
WARNINGS
•
Only use the product for its intended
purpose.
•
Do not disassemble or modify in any way.
•
Keep away from heat and moisture.
•
This toy is not suitable for children aged 3
or under. Risk of suffocation due to small
parts.
•
Remove the remote batteries when not in
use.
•
Do not mix old and new batteries.
•
Do not mix standard alkaline batteries with
rechargeable batteries.
•
Only suitable for indoor use.