smania OCTOPUS Instructions

INSTRUCTIONS
OCTOPUS INTERACTIVE TOY

COMPONENTS

•
Octopus toy
•
2 polystyrene balls

TECHNICAL SPECIFICATIONS

•
Size: 18 × 18 × 16 cm
•
Material: ABS, EPS
•
Powered by 3 1.5 V AA batteries (not
included)

INSTALLATION

•
Turn the toy upside down and ensure the
power switch is set to "OFF".
•
Loosen the safety screw on the battery
compartment to open the cover.
•
Insert 3 AA batteries (not included). Mind
the polarity.
•
Close the compartment and tighten the
safety screw.

OPERATION

•
Place the toy on a flat surface.
•
When the wheels protection on the bottom
is used, the toy stands still and can be used
on a table or other small area.
•
When the wheels protection on the bottom
is removed, the toy should be placed on a
flat surface with enough space to move
around.
•
Turn ON the octopus by flipping the
ON/OFF switch to the "ON" position.
•
The octopus starts moving around the room
with flashing lights, playing a cheerful tune.
•
When the octopus encounters an obstacle,
it turns around and moves in another
direction.
•
Place the polystyrene ball on the hat of the
octopus. The toy generates a strong air flow
that lifts the ball up and suspends it in mid-
air.
•
To turn off the toy, flip the power switch to
the "OFF" position.

WARNINGS

•
Turn OFF the product and remove batteries
when not in use.
•
Batteries should be inserted with the
correct polarity to prevent a short circuit.
•
Do not mix old and new batteries.
•
Only use batteries of the same or
equivalent type as recommended.
•
Do not expose batteries to high
temperatures or direct sunlight.
•
The product contains small parts.
Suffocation hazard!
•
Not suitable for children under 3 years.
•
Keep away from water and fire.
•
Clean the product with a damp cloth.