Mayne Liberty Assembly Instructions

Assembly Instructions

General Information:

• Read instructions carefully before beginning assembly.
• Identify each component from material list.
• Do not use excessive force when assembling components.
• To clean this product, for best results use a soap solution and high-pressure water.
• In the event of missing or defective parts, please call our customer service department.

Materials List:

Part# Description
1 Decorative post
2 Mailbox arm

Hardware Pack Includes:

3 1/4" x 3" galvanized lag bolt
4 5/16" galvanized flat washer
5 #1 Ox 3" steel screw
6 Plastic snap cap
7 4x4 Wood Post - not included
4x4 actual dimensions are 3.5in x 3.5in
72 in length is recommended

Tools Required:

- Cordless drill
- Phillips drill bit
- 7/16" socket wrench
- Tape measure
- Level
- Shovel
TOOLS REQUIRED
JJJJ
Shovel Cordless Drill Tape Measure

IMPORTANT NOTE

• 4x4 wood post, mailbox, and mailbox mounting hardware NOT included with any Mayne mail posts
• Recommended mailbox weight up to 16Ibs, heavier mailboxes can be reinforced
by securing 2 screws through the back of the mailbox directly into the post
• Please refer to local codes for mailbox installation height and setback from the curb
Quantity
2
2
2
2
ICI@.D@.D@IJI
7116"' Phillips Bit Level
'
'
Liberty
Mail Post