Insinger Eliminator 900 Specifications

6245 State Road
Philadelphia, PA 19135-2996
215-624-4800
215-624-6966 FAX
800.344.4802
w w w . i n s i n g e r m a c h i n e . c o m
ELIMINATOR 900
WASTE HANDLING SYSTEM

DESIGN

Automated self contained waste handling system. The system reduces
foodservice waste volume by up to 90%, resulting in lower labor and
hauling costs. Process water is re-circulated for re-use, saving water
and sewage costs. External silver catch lessens costly silverware
replacement. Complete renewal servicing of wear parts accomplished
without disturbing either the electrical or plumbing connections. Rated
Capacity is 900 lbs. per hour of mixed foodservice waste including
food, disposables and paper products.

STANDARD EQUIPMENT

•
Total stainless steel construction
•
Automatic, 12 nozzle, wash-down system for extractor
•
Extractor screw/screen removable from top!
•
2 HP TEFC bottom mount extractor drive motor
•
5 HP direct drive cutting system motor
•
1 HP TEFC re-circulating pump
•
NEMA-12, carbon steel control panel enclosure
•
Integral or remote NEMA-4 push button station
•
Single point electrical connection
•
Pulper lid interlock switch
•
Extractor chute interlock switch
•
Automatic Shutdown timer for self-cleaning
•
Cylindrical extractor for easy cleaning– No corners!
•
Trough connection
•
Re-circulating pump
•
Automatic pulper cleaning package with integral wash and rinse cycle
•
Permanent trough magnetic for silverware catch
•
Dual use cutting blades

OPTIONAL ACCESSORY EQUIPMENT

•
Security package inclusive of:
•
Pulper lid and extractor discharge chute locking rings
•
NEMA-4 stainless steel electronic panel enclosure
•
Tamper proof fasteners
•
Hose reel (30 ft. unmounted)
•
Remote start-stop station
•
Chemical additive pump