Table of Contents
Advertisement
7. Select the appropriate
RTK correction stream.
Since we are using a 'radio
(UHF) base', select 'Internal
radio' for standard radio
configuration.
Click 'Next' when done.
8. The first time you
configure the radio, you
may need to populate the
channels. If 'No frequencies'
is indicated on the first line,
click 'Tools' below and 'Load
configuration from receiver'.
See yellow arrow in the
screenshot to the right. Be
sure to set Spacing to 12.5
to comply with FCC Narrow
banding rules.
Base power can be set to
0.1, 0.5, 1, or 2 Watts.
Click 'Next'.
39
Note:
FCC licensing required for
GNSS radios.
Advertisement
Table of Contents
