Inserting Batteries And Sim Card - eGPS Solutions 20T Quick Start Manual

2.4. Inserting Battery and SIM Card
Push down on the button on the battery cover to open the
cover.
Align the connectors of the batteries with the connections
on the receiver. Insert the battery into the battery
compartment until it is locked by the battery bail. Snap the
battery cover back into place when finished.
To remove the batteries, push down on the button on the
battery cover and open the cover. Slide the battery bail to
the left or right.
Push down
Battery bail
on button
and lift
Battery SIM card
Battery cover
compartment slot
The SIM card can be inserted in the slot above the battery
compartments. The notched end of the SIM card does NOT
go into the slot.
To remove the SIM card, lightly press down on the card, and
pop the card out of the socket.
Tip – The SIM card is provided by your GSM cellular
network service provider.
15