5.3 MOUNTING WITH CLAMPS
Mounting with clamps at the long side of frames
The module frame is not to be modified under any circumstance. When choosing this type of clamp mounting method,
please be sure to use at least four (4) clamps on each module, two (2) clamps should be attached on the long sides
of the module.
Depending on the local wind and snow loads, if excessive pressure load is expected, additional clamps may be required
to ensure that the module can bear the loads. The applied torque should be 18-24 N*m.
Table 2: Fixture Range
No
PV Cell
1
182-Half-cut module
2
166-Half-cut module
3
166-Half-cut module
4
158-Half-cut module
5
158-Half-cut module
6
158-full cell module
7
158-full cell module
PV Module Type
BVM7612M-XXX-H-HC-BF-
DG (144 cells) BVM7612M-
XXX-H-HC-BF (144 cells)
BVM6612M-XXXS-H-HC-BF-
DG (144 cells) BVM6612M-
XXXS-H-HC-BF (144 cells)
BVM6610M-XXXS-H-HC-BF-
DG (120 cells) BVM6610M-
XXXS-H-HC-BF (120 cells)
BVM6610M-XXXL-H-HC-BF-
DG (144 cells) BVM6610M-
XXXL-H-HC-BF (144 cells)
BVM6610M-XXXL-H-HC-BF-
DG (120 cells) BVM6610M-
XXXL-H-HC-BF (120 cells)
BVM6612M-XXXL-H-BF-DG
(144 cells) BVM6612M-
XXXL-H-BF (144 cells)
BVM6610M-XXXL-H-BF-DG
(120 cells) BVM6610M-
XXXL-H-BF (120 cells)
PV Module Size
2296*1134*35mm
2135*1046*35mm
1794*1046*35mm
2052*1002/1004*35mm
1727*1002/1004*35mm
2015*1002/1004*35mm
1693*1002/1004*35mm
Fixture Range
J:350
K:500
J:385
K:530
J:270
K:355
J:350
K:490
J:265
K:380
J:360
K:560
J:250
K:365
08