Advertisement
Quick Links
Advertisement
Related Manuals for cadenbach MINERVA
Summary of Contents for cadenbach MINERVA
- Page 1 MINERVA Manual volume: E 0.0...
-
Page 2: Safety Precautions
If you place several systems on top of one another, use straps to secure them against movement. • Only use accessories which have been tested and approved by Cadenbach Acous- tics for assembly and mobile applications. Pay attention to the correct application and maximum load capacity of the accessories. -
Page 3: Product Description
MINERVA offers four 8 mm inserts for mounting. Even full active equipped MINERVA is still light wight and offers in all version more than 133 dB SPL at 1 meter. This enables the system to be used as main Loudspeaker system either as single speaker or in multiple horizontal and also vertical speaker array arrangement. - Page 4 MINERVA 10 inch FIR point source loudspeaker Data Technical Specifications Transducers Crossover type and frequency • Low frequency: 10 inches • Filter type active: FIR zero phase (254 mm) Neodymium Low to Mid High: 1.1 - 1.6 kHz • High frequency: 1.5 inches •...
- Page 5 MINERVA 10 inch FIR point source loudspeaker Data Technical Specifications Internal Amp module Ac Power connection • Type of output stage: free floating • Powercon 25 A blue in and white link modulator FM out put power stage (max 12,6 A link) •...
- Page 6 MINERVA 10 inch FIR point source loudspeaker Data Measurements Frequency response with FIR Filter of MINERVA Phase response FIR linear phase Filter of MINERVA www.cadenbach.eu...
- Page 7 10 inch FIR point source loudspeaker Systems System setups: MINERVA S1 System for Main or side, stage fill system use, with 4 x MINERVA-10P with 4 x TE- THRA subwoofer, 2 x PAX-P16 Amp + 1 x HEIMDALL D05 FIR Controller. POWER...
- Page 8 10 inch FIR point source loudspeaker Save operating Protecting your speaker MINERVA speakers may be used in combination with Cadenbach Acoustics PAX Amplifiers and Cadenbach Acoustics HEIMDALL controller. In general, audio signals must not be over driven. This may be caused by mixing consoles, equalizers, effect equipment, etc.
-
Page 9: Manufacturer's Declarations
We herewith declare that said products are in conformity with the provisions of the respective EC directives including all applicable amendments. A detailed declaration is available on request and can be ordered from Cadenbach Acoustics. WEEE Declaration (Disposal) Electrical and electronic equipment must be disposed of separately from normal waste at the end of its operational lifetime.