Advertisement
*The new trainer pod comes with a battery insulation sheet that must be
removed from the battery compartment before use.
Cadence mode
1.Remove and reinstall the battery and the red indicator lights up to indicate that the
pod is in cadence mode.
2.Install the flat silicone gasket on the bottom of the pod and install the pod on the
inside of the left crank using a rubber ring.
Rotate the crank and search for the pod using an Bluetooth device
Power trainer mode
1.Reinstall the battery and the green light will illuminate to indicate that the pod is in
power trainer mode.
2.Install the pod on the rear hub using a rubberring.
3.Spin the wheel and search for the pod using Onelap utility APP on a smartphone
Advertisement
