ALDI LIGHTWAY 872-B-S User Manual page 17

1. Take the product out of the packaging. Before start-up,
remove all protective films.
2. Check whether the delivery is complete (see Fig. A and B).
3. Check whether the product or the individual parts are
damaged. If this is the case, do not use the product.
Contact the manufacturer at the service address specified
on the warranty card.
Inserting batteries
Danger of explosion!
Improper handling of the rechargeable
batteries can cause an explosion or a fire.
− Never expose the batteries to direct
sunlight.
1. Remove the rear panel
unscrewing the fixing screw
2. Remove the battery compartment cover
unscrewing the fastening screw
3. Insert the batteries in the battery compartment
noting the correct polarity.
4. Reattach the battery compartment cover.
If you are setting up the spotlight for the first time there is
no need to reattach the rear panel to the spotlight; you can
continue with set-up immediately.
WARNING!
8
from the spotlight
(see Fig. B).
6
.
14
First use
by
7
by
13
,
15
17