Adjusting The Blowing Speed With 2-Speed Switch; Residual Risk - FERREX 705158 User Manual

1100 w turbine blower
Table of Contents

Advertisement

Caution!
- Do not blow hard objects such as nails, bolts,
or rocks. It is recommended to inspect the
area you are blowing before starting use to
ensure this does not occur.
- Do not operate the blower near bystanders or
pets.
- Use extra care when cleaning debris from
stairs or other tight areas.
- Wear safety goggles or other suitable eye
protection, long pants, and shoes.
3. Adjusting the blowing speed with 2-speed
switch (4) (See Fig. G1, G2)
Move the on/off switch (4) to "I" position, and
the blower will run at a lower speed. (See Fig. G1)
Move the on/off switch (4) to "II" position, and
the blower will run at a higher speed.
(See Fig. G2)

Residual risk

Even if you use the 1100 W blower properly per the instructions provided
and following all safety notes, there are always residual risks. The following
risk may occur:
- Accidental Starting: Always unplug the blower from the power outlet
before carrying out any adjustment, servicing or maintenance. When not
in use, store the blower in a safe, dry, clean environment.
- Risk of blowing: Do not direct the output of the blower tube at any person,
the operator, or any animals. Never place hands in front of nozzle, direct
blowing away from self or others, and always operate in an area clear of all
persons, pets and obstacles. Do not operate the product when fatigued or
under the influence of alcohol or drugs, stay alert at all times.
Reduce residual risks by using the 1100 W blower with care and following all
safety notes as well as other instructions.
13
e-mail: info.aldi@positecgroup.com
MODEL No.: GBV100W • 03/2022 • 705158
1100 W Turbine Blower
G1
G2
AFTER SALES SUPPORT
1300 889 028
(toll free)

Advertisement

Table of Contents
loading

Table of Contents