Fisher & Paykel DD24DTX6I1 User Manual page 29

2
5
Racking features
1 Folding tine rack
2 Adjustable tine rack
3 Base rack
Base rack
front
RACKING FEATURES
4 Trap door
5 Cup racks
Not illustrated: glass supports
To remove
1 Fold the front cup racks up, and lift to their
highest position.
2 Fold the rear cup racks up and lower to
their lowest position.
3 While holding the wire cup rack supports
inward so the top bar clears the side,
carefully lift and tilt the rack out towards
you. Take care to lift the front around the
dispenser and ensure that the front cup
racks are clear of the corners of the flange.
To replace
1 Ensure cup racks are oriented as above.
2 Hold the cup rack supports and lower the
rack down from each side taking care to
lower the front around the dispenser.
3
4
1
5
29