Advertisement
Quick Links
Advertisement
Related Manuals for Lightstar AIRLITE Series
Summary of Contents for Lightstar AIRLITE Series
- Page 1 AIRLITE Series User Manual...
- Page 2 User Manual Version: 23. Dezember 2021, 11:37 AM Lightstar Lights info@lightstar-lights.com...
-
Page 3: Table Of Contents
Table of Contents Product Overview Product Features Technical Information Operational Instructions DMX Control Wireless DMX Control Notice and Maintenance Service Warranty Ordinance... -
Page 4: Product Overview
Product Overview Lightstar LED Airlite is a Bi-Color LED Balloon light. It features: - high efficiency - low power consumption - low operating temperature - Color temperatures from 2800 - 6500K - DMX and Wireless DMX Product Features • 360° light illumination •... -
Page 5: Technical Information
Technical Information SKU: LMSA-2000 Description: Bi-Color LED Spotlight Power: 1000W Material: different materials Cooling: Active Cooling Color Temperature: 2800-6500K Dimming: 0-100% CRI: TLCI: >96 AC Input (indirect): 100-240V AC Control: DMX In- & Output (5-Pin XLR socket) Frequency: 1-50Hz IP Class: IP20 Diameter (inflated): 1800mm... -
Page 6: Operational Instructions
Operational Instructions Connect the power supply to the input socket of the lamp head. The fan will inflate at 100% speed automatically. After 10 seconds, the light brightness will turn on 10%. 1 minute later, the light brightness becomes 100%. 2 minutes later, the light is fully infated and it enters the fan mode to sustain the air level. - Page 7 Light Mode LIGHT MODE DMX Setup Bi-Color FAN Mode Strobe Information Figure 3 - Menu Screen Figure 4 - Light Mode Screen Select button M or quick link button E to enter light mode selection screen. Bi-Color Strobe Set Brightness Brightness Color Strobe...
-
Page 8: Dmx Control
DMX Control There are two kinds of DMX signal control: Wireless DMX and DMX. By default, DMX is selected. There are 5-Pin XLR In- & Outputs on the console for DMX via cable. For wireless DMX, there is an antenna mounted on the side of the ballast. -
Page 9: Wireless Dmx Control
Wireless DMX Control Click the push button to show current ID settings. Click the push button to increase number. 1 - Red 2 - Green 3 - Yellow 4 - Blue 5 - Purple 6 - Bluish Green 7 - White Working Status: LED is always on no DMX or no signal... -
Page 10: Notice And Maintenance
8. The technicians must get professional trainings to install, operate or repair LED‘s. 9. If any equipment from Lightstar doesn‘t work properly, please get in contact with a Lightstar special repair department or professional techni- cian. Do not disassemble or reassemble the parts by yourself. -
Page 11: Service Warranty Ordinance
- Damage caused by misuse or abuse, disassembly and non-original parts replacement. - Damage caused by natural disasters, unconventional voltage and envi- ronmental factors 3. Lightstar will remain in the power of interpretation. 4. Software version modification without further notice.
Need help?
Do you have a question about the AIRLITE Series and is the answer not in the manual?
Questions and answers