Page 1
OPERATING INSTRUCTIONS MUST BE READ PRIOR TO OPERATING THIS MACHINE Towed Multi Surface Manège Groomer Ref: MSMGT...
Page 2
DESCRIPTION The manège groomer is ideal for maintenance of both sand and fibre or sand and rubber surfaces. Spring tines lift the sand and the two crumb rollers redistribute the material evenly, providing you with a level, even and safe surface for riding. The wheels make transportation and storage of the unit quick and easy.
Page 3
Do not turn sharply at the end of a row, take a wide turning arc. Never reverse the unit with the tines or roller in contact with the ground. If in doubt, please call the SCH customer help line at 01473 328272.
Page 4
Once you have adjusted the depth setting be sure to replace the holding pins that stop the depth control handles from moving. SCH Supplies accept no responsibility for any damage caused by incorrect settings.
Page 5
OPERATION Once the unit is in the arena: Raise the transport wheels fully by winding the wheel handles in a clockwise direction until the wheels are fully retracted and the unit is riding on its back and front crumble bars. Remove the transport fixing pin so that the tow bar is in its ‘floating position’.
Page 6
MAINTENANCE Wash down after use, do not pressure wash the bearings on the crumble roller. Grease the screw jacks and all moving parts at regular intervals. GENERAL GUIDELINES Maintenance of your arena surface is one of the most important activities you can carry out to maintain its importance.
Page 7
Your Towed Multi Surface Manège Groomer is guaranteed for 12 months from the date of purchase. This guarantee covers faults which may occur from defective parts or manufacture. SCH Supplies accept no responsibility for any damage caused by incorrect settings. Damage caused by inability to follow instructions will void warranty.
Page 8
If you are missing your free brochure contact us on 01473 328272, email sales@schsupplies.co.uk, or visit our website www.schsupplies.co.uk...
Need help?
Do you have a question about the MSMGT and is the answer not in the manual?
Questions and answers