Related Manuals for SCH DCR
Summary of Contents for SCH DCR
- Page 1 OPERATING INSTRUCTIONS MUST BE READ PRIOR TO OPERATING THIS MACHINE De-Compaction Rake Ref: DCR...
- Page 2 Two rows of levelling bars re-spread the fill to the surface. Finally, a strip brush finishes the surface. The DCR is mounted on a four-wheel chassis. The two front wheels are solid casters to allow for turning in tight corners. The two rear wheels are on jacklegs and are adjustable for transportation.
- Page 3 Always store the unit in the transport position. It is not recommended to use the brush alone -Note: The Decompaction rake should only be used in conjuncture with the surface manufactures’ recommendations. If in doubt, please call the SCH customer help line at 01473 328272.
- Page 4 OPERATION Transportation to the working area: Once the unit is attached to the towing vehicle check to see the side jacks are lowered to take the weight on the transport wheels. The tines, bars and brush must be kept clear of the ground. At the playing surface: ...
Need help?
Do you have a question about the DCR and is the answer not in the manual?
Questions and answers