Introduction - Nutfield Technology XLR8 Manual

Nutfield Technology
XLR8 Scan Head Hardware Manual

1. INTRODUCTION

T
that alert you to the hazards and the laser beam path you can expect while running the XLR8.
The XLR8 Scan Head is extremely intricate, and since it consists of galvanometers that
reflect the laser beam, it can be hazardous if certain precautions are not taken. Please be alert to
the safety considerations and specific procedures regarding the XLR8 Scan Head and the laser
you are using.
Conventions
Throughout the manual you will see graphic icons representing pertinent information in the
text. The purpose of these icons is to provide a visual convention to alert you of a stop in the
flow of the manual, where an important note or safety hazard alert is posted.
The conventions are listed as follows, showing both the text and the picture you will see.
WARNING
91-0021 Rev. D
his manual details the instructions on how to install and operate hardware of the XLR8
Scan Head. Included is information on setting up the hardware in preparation for your
software commands, at which point you can refer to the proper software manual.
Be careful to observe the information in the Environmental Requirements section
WARNING indicates an imminent danger to the user.
CAUTION alerts you of a potential danger to equipment or the user.
NOTE is an important procedure you should be aware of before proceeding.
TIP and REMINDER are helpful hints to procedures listed in the text.
CAUTION
Copyright © 2010 Nutfield Technology
REMINDER NOTE
XLR8
TIP
1