Connecting External Speakers; Connecting The Remote Control Cable - InFocus LP930 User Manual

Connecting External Speakers

To connect one or two external speakers, plug the speaker cable
into the out (audio out) connectors on the projector. The
external speaker's volume is controlled by the projector; see "Vol-
ume + or -" on page 26.

Connecting the Remote Control Cable

If the projector cannot receive the remote's signal, as may be the
case if you're using rear projection, connect the remote directly to
the projector with the optional remote cable. See "Optional
Accessories" on page 50.
1 Plug the remote cable into the wired remote connector on the
projector.
2 Plug the other end into the connector on the remote.
A A
R G B
0 0
BNC BNC L R L R L R
out In In In
Connecting external speakers
A A s
R G B
0 0
BNC BNC G B R
L R L R L R
out In In In
Connecting the remote control cable
s
G B R
F 13
IGURE
F 14
IGURE
NOTE: For more information on
using the remote, see page 22.
15