Connecting A Video Player - InFocus LP930 User Manual

Connecting a Video Player

There are 3 video inputs: Composite video, S-video, and Compo-
nent video. For Composite and S-video, follow these instructions:
1 If your video player uses a round, one-prong composite video
connector, you'll need only the A/V cable that shipped with
the projector.
If your video player uses a round, four-prong S-video con-
•
nector, you'll need an S-video cable in addition to the A/V
cable. The S-video cable is sold separately. (See "Optional
Accessories" on page 50.)
2 Plug the A/V cable's yellow connector into the "video-out"
connector on your video player (Figure 11). This connector
may be labeled "To Monitor."
If you're using an S-video cable, connect it to the "S-video
•
out" connector on the video player (Figure 12).
3 Plug the other yellow connector into the composite video con-
nector on the projector.
If you're using S-video, plug the other end of the cable into
•
the "S-video" connector on the projector (Figure 12).
Connecting the projector to a video player using the standard A/V cable
A A
R G B
0 0
BNC BNC
L R L R
out In
A/V cable
s
G B R
L R
In In
F 11
IGURE
NOTE: HDTV sources are con-
nected to the projector using the
computer inputs, not the video
inputs. All analog computer inputs
can display HDTV. See the previ-
ous pages for computer connection
instructions.
13