Dutch Pinball The Big Lebowski Technical Support page 81

Dutch Pinball – Technical Support TBL FAQ
Sometimes the BIOS of the PC 'forgets' its Power On setting. If this occurs the game will not turn on
when you engage the main power switch of the game.
Follow these steps to enable the Power On setting in the BIOS of the PC:
1. Make sure the game is turned off with the main power switch in the 0 position:
2. Temporarily remove the SATA cable from the CPU board:
(By doing this you make sure the PC will always boot to the BIOS).
Page 81 Restore power setting Bios faq rel .0.50
rev 0.51