Run/Tow Switch - ZHONGSHAN ETECH H-Series Owner's Manual

2.10 LOCKING GLOVE BOX
The vehicle is equipped with a locking glove box at the right edge of the dashboard. There
is a key switch that is used to unlock the glove box.

2.11 RUN/TOW SWITCH

The Run/Tow switch is located on controller cover. When the Run/Tow switch is in the Run
position, the controller and all operating features of the vehicle are enabled.
When the Run/Tow switch is in the Tow position, the controller and electronic parking
brake system are deactivated allowing the vehicle to roll freely.
NOTE
the vehicle. Make sure the Run/Tow switch is in the Tow position before towing the vehicle.
∆
CAUTION ...
When the Run/Tow switch is moved from the Tow position to the Run position, there is a
delay of approximately 30 seconds before the vehicle's electrical system is fully enabled.
∆
WARNING
... The Run/Tow switch should be in the Tow position to disable the vehicle drive system and
avoid unintended movement of the vehicle during the performance of general vehicle maintenance activities.
all rights reserved
∆
...
The Run/Tow switch must be moved to the Run position before operating
8 ! OWNER'S MANUAL 2019-O-M-001