Table of Contents
Advertisement
Installation diagram:
UNPACKING AND CLEANING THE WINE COOLER
Remove the exterior and interior packing materials.
Let the appliance stand upright for approximately 24 hours before connecting it to the
power source. This helps reduce the possibility of a cooling-system malfunction from
handling during transportation.
Use a soft cloth to clean the interior surface with lukewarm water.
Install the door handle provided with the appliance by following these steps:
Step 1 －Remove the gasket at the inner side of the door
to expose the two screw holes.
Step 2 －Install the handle securely with the
screws and washers provided.
Be sure not to overtighten on full glass models as
this can crack the glass.
Step 3 －Tidy and restore the gasket. If gasket
shows gaps or warping, use a blow dryer to
gently heat the gasket back to its original shape.
8
Advertisement
Table of Contents
