OENOPRO TGLSST-RHSSSH-SZ Instruction Manual page 4

Description of product number
OPERATING YOUR WINE COOLER/BEVERAGE COOLER AND SETTING THE
 Control System Instruction

Power switch

℃/℉ switch: Press ℃/℉ button to change the temperature display between Celsius and
Fahrenheit.

Temperature setting button
pressing it for the first time, the display flashes and shows the setting temperature. After 5
seconds, it shows the measured interior temperature. Press
temperature and press

Display window: 2-digit LED display to show setting temperature or actual interior temperature.

Light button
opening the door.

Key lock function: If there is no any operation with digital control for 3 minutes, it will be locked
automatically. Press
 Setting The Temperature Controls
You can set the temperature as you desire by pushing the "+"or "-"button. When you push the

two buttons for the first time, the LED readout will show the original temperature set at the
previous time.
The temperature setting you desire will increase 1ºC if you push the"+"button once, on the

contrary the temperature will decrease 1ºC if you push the "-" button once.
To view the "set" temperature, (anytime) press and hold the corresponding button for

approximately 5 seconds, the "set" temperature will temporarily "flash" in the LED display for 5
seconds.
 Control System Instruction
TEMPERATURE CONTROL
: Press for 3 seconds to turn the unit on or off.
: Press
to decrease the setting temperature.
: Press to turn on or off. The light will be automatically on when
and at the same time for 3 seconds to unlock.
before adjusting the temperature. When
4
to increase the setting