Related Manuals for Sunless Mystic Tan KYSS
Summary of Contents for Sunless Mystic Tan KYSS
- Page 1 Mystic Tan Kyss™ Owner’s Manual Technical Guide to the Mystic Tan KYSS (MT-6500) 220V 50/60 Hz Owner’s Manual www.sunless.com Version 1.0...
- Page 2 __________________ Installation Date: ____ / ____ / ______ Mystic 6500 Sunless, Inc. 8909 S Freeway Drive Macedonia, OH 44056 Tech Support: (855) 450-3500 For Support with Sales, Solutions, Lotions, and Products: (888) 974-9977 ©Copyright 2016 Sunless, Inc. All Rights Reserved...
- Page 3 Mystic Tan Kyss™ Owner’s Manual SAFEGUARDS Your safety and the safety of others are very important. We have provided important safety information in this manual. Please read and obey all safety messages before operating the Mystic Kyss. It is the responsibility of the owner and operator of the Mystic Kyss to comply with all appropriate safety and health laws, as well as other applicable national, state and local laws and ordinances when operating and maintaining the Mystic Kyss equipment.
-
Page 4: Table Of Contents
Mystic Tan Kyss™ Owner’s Manual Table of Contents Important Safety Instructions ......................7 FDA Recommendations ......................9 Welcome to the Mystic Tan KYSS ....................10 Preparing for the Kyss Arrival ...................... 10 Dimensions for the Kyss ......................11 Preparing for Your First Use......................13 Getting to Know the Touchscreen Features .................. - Page 5 Mystic Tan Kyss™ Owner’s Manual Daily Maintenance ........................25 Line Purge ..........................25 Clean Exhaust Filter ......................26 Clean the Drain Filter......................27 End of Day Maintenance ...................... 28 Daily Maintenance Checklist ....................29 Daily Inspection Checklist ....................29 Weekly Maintenance ........................ 30 Clean Top Exhaust Filter ......................
- Page 6 Mystic Tan Kyss™ Owner’s Manual Fault Codes and Descriptions ....................45 Blue Faults ..........................45 Orange Faults ........................46 Red Faults ..........................47 Appendix 2: Technical Diagnostic Output Tolerances ..............49 Appendix 3: Quick Start Staff Guide .................... 50 Select a Solution and Myxer ..................... 50 Prepare the Booth ........................
-
Page 7: Important Safety Instructions
Mystic Tan Kyss™ Owner’s Manual Important Safety Instructions DANGER!!!: To reduce the risk of property damage, burns, fire, electric shock, death or injury to persons, read the following important safety information and all instructions before operating/using the Mystic Kyss. Carefully read this manual and follow ALL instructions before using the Mystic Kyss booth. - Page 8 Mystic Tan Kyss™ Owner’s Manual immediately discontinue use of the booth. Please contact Sunless, Inc. Technical Support at (855) 450-3500 for instructions on how to obtain replacement parts when necessary. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon.
-
Page 9: Fda Recommendations
A link to the FDA advisory can be found on the Sunless Inc., Mystic Tan and Versa Spa web sites. Additionally, salons can order an informational brochure to display in your business and distribute to your tanners named “What is Sunless Spray Tanning/FAQ”. To assist in your training efforts. -
Page 10: Welcome To The Mystic Tan Kyss
Mystic Tan Kyss™ Owner’s Manual Welcome to the Mystic Tan KYSS Congratulations on your purchase of the Kyss. This revolutionary automatic spray booth has been designed based on decades of market research and customer feedback. We have been listening to everything you have been telling us, and here is the answer: The Kyss. Every aspect of the automated spray tan has been evaluated and reconstructed to meet the diverse needs of the salon management, the salon attendants, the technicians, and, of course, the salon customers. -
Page 11: Dimensions For The Kyss
Mystic Tan Kyss™ Owner’s Manual ✓ A cold water inlet with a cutoff valve within four feet of the back of the unit. The inlet requires a minimum of 40 PSI to a maximum of 100 PSI and the capability to deliver 4 gallons of water per minute. The cutoff valve must be accessible after installation and should be cut off nightly to avoid leakage. - Page 12 Mystic Tan Kyss™ Owner’s Manual Front view- Doors Open Top view- Doors open Room Layout...
-
Page 13: Preparing For Your First Use
Mystic Tan Kyss™ Owner’s Manual Preparing for Your First Use Now that your Mystic Tan Kyss booth has been successfully installed, let’s go over a what to do to prepare for your first use. To get started, plug the Kyss into a 220 VAC (208 – 240 VAC) dedicated outlet (NEMA 6-15, pictured below). -
Page 14: The Staff Screen
Mystic Tan Kyss™ Owner’s Manual Settings Gear Icon- Access Home Screen MT Connect™ Icon*- to settings. If the setting Green= full network icon is Blue, it means that a connectivity message appears in the Red= not connected to message center. Will not Internet appear in Remote Mode. -
Page 15: Note On Page Navigation
Mystic Tan Kyss™ Owner’s Manual Note on Page Navigation Navigating between pages and screens is accomplished simply by touching the corresponding tab. The current screen selection is highlighted in red (Staff, Technical, or Admin). The page within the screen you are viewing is highlighted in white. Notice the “Messages” tab on the left of the “Staff”... -
Page 16: Staff Settings Page
Mystic Tan Kyss™ Owner’s Manual Drain: Activates the drain pump for additional time to remove any residual liquid waste. This can be a result of additional interior cleaning or in preparation for cleaning and maintenance. This is an especially handy feature to use prior to sump float cleaning and maintenance. -
Page 17: The Technical Screen
Mystic Tan Kyss™ Owner’s Manual The Technical Screen The technical screen provides access to plethora of options and diagnostic tools. The Technical screen is password protected, so you will be prompted to enter the Technical password to visit any of the pages on this screen. -
Page 18: Technical Input Diagnostics
Mystic Tan Kyss™ Owner’s Manual Technical Input Diagnostics The Technical input diagnostics page displays the current state of various sensors and inputs from the booth. Checking these diagnostics can save time during troubleshooting and diagnostics by seeing the current state of a sensor without having to check the component manually. A complete list of values, along with descriptions is provided below. -
Page 19: Technical Diagnostic Outputs
Mystic Tan Kyss™ Owner’s Manual Technical Diagnostic Outputs The Diagnostic Outputs page provides a way to manually check the operation and output of the various components and systems of the booth. Using these options will save a considerable amount of time in troubleshooting and identifying issues before they arise. Along with the option to toggle the various systems ON and OFF, this screen will display important information regarding the state and performance of the components. -
Page 20: The Admin Connectivity Page
Mystic Tan Kyss™ Owner’s Manual Admin Setting Description Allows for use of another controller for the booth without the use of the Control Mode touchscreen, such as TMAX (TMAX modules may be purchased separately). Begins the rinse cycle once the user exits the booth, without requiring user Auto Rinse interaction. -
Page 21: Preparing For Your First Session
Mystic Tan Kyss™ Owner’s Manual To adjust for time and date, enter the correct settings for Day, Month, Year, Hour, and Minute using the arrows to the right of each category. Once you are finished setting the values, press the “Set Date Time Now” button and the changes will be applied. -
Page 22: Running Your First Session
Mystic Tan Kyss™ Owner’s Manual Running Your First Session After reviewing the appropriate indicators, it is almost time to hit the “Get Started” button located directly above the Settings icon on the Home screen. You may press the “Get Started”... -
Page 23: Warming Up
Mystic Tan Kyss™ Owner’s Manual scanner will begin flashing and read the bar code on the side of the cartridge. Once the barcode is recognized, the booth will chime and the name of the solution will be displayed to the right of the Reservoir indicator. -
Page 24: Rinse Down
Mystic Tan Kyss™ Owner’s Manual The user to receive the tan only needs to stand in the booth with their feet on the metal, foot- shaped pads and wave their hand in front of the start sensor. The dielectric effects of the spray will work even if the user is wearing foot pads or cloth protectors. -
Page 25: Daily Maintenance
Mystic Tan Kyss™ Owner’s Manual The maintenance schedule is broken down into Daily, Weekly, and Monthly maintenance operations to ensure your booth stays in good working order. Along with normal maintenance procedures, there is also an inspection list to review with each scheduled maintenance. Routine inspections can help to identify issues before they become problems. -
Page 26: Clean Exhaust Filter
Mystic Tan Kyss™ Owner’s Manual Clean Exhaust Filter Clean the inner exhaust filter, as well as the inside and outside of the filter housing. Make sure to have the spare filter clean, dry, and ready to insert. Avoid any abrasive cloths or cleaners. -
Page 27: Clean The Drain Filter
Mystic Tan Kyss™ Owner’s Manual Clean the Drain Filter Clean the drain filter and sump basin to remove excess sediment and ensure no obstructions form. The drain filter cover will simply snap off, providing access to the filter and sump basin. Regularly neglecting the drain filter can lead to clogging of the sump and failure to drain properly. -
Page 28: End Of Day Maintenance
Mystic Tan Kyss™ Owner’s Manual End of Day Maintenance After purging the lines, cleaning the exhaust filter, and the drain filter, take the time to close the booth down correctly. • Wipe down the booth with clean, warm water and a soft, nonabrasive cloth. If there are any stains, simply use a few drops of Dawn or other mild cleaner in warm water to remove. -
Page 29: Daily Maintenance Checklist
Mystic Tan Kyss™ Owner’s Manual Daily Maintenance Checklist A Daily Inspection checklist is provided below. Use this at the end of each day to ensure that no maintenance steps have been missed and that no problems may be silently forming. Prevention is always preferable to repair. -
Page 30: Weekly Maintenance
Mystic Tan Kyss™ Owner’s Manual Weekly Maintenance The following actions are only suggested once per week to keep the booth operating like new. Repeatedly neglecting the weekly maintenance can lead to a visible accumulation of solution particles and a reduced ability to properly filter the booth. -
Page 31: Weekly Maintenance Checklist
Mystic Tan Kyss™ Owner’s Manual Once the top exhaust filter is removed, take it to a sink and wash with warm water. Only once the filter has been allowed to fully dry should it be reinserted into the ceiling. Do not run the booth with the top exhaust filter removed. -
Page 32: Clean Float Switch Plate And Sump Basin
Mystic Tan Kyss™ Owner’s Manual Clean Float Switch Plate and Sump Basin An in-depth cleaning of the float switch plate and sump basin should be performed monthly and extends beyond rinsing the filter. Repeated failure to perform this action could lead to clogging of the sump basin and sticking float sensors, which could register as a booth fault and cause problems when trying to run a session. -
Page 33: Clean Heater And Compressor Filters
Mystic Tan Kyss™ Owner’s Manual Clean Heater and Compressor Filters Clean the intake filters to ensure the air coming into the booth is properly filtered, both for comfort and to avoid particles entering the booth. Repeatedly neglecting this maintenance can lead to reduced air intake and particles being introduced through the air vents. -
Page 34: Monthly Maintenance Checklist
Mystic Tan Kyss™ Owner’s Manual Monthly Maintenance Checklist Troubleshooting The troubleshooting section below is divided by topic, with each topic receiving a header, beginning with topic T1 and continuing through T7. See the table of contents for a quick view of all troubleshooting topics. -
Page 35: T1. Internet Connectivity
Sunless server every few seconds. The heartbeat in conjunction with the Star icon will allow you to view the status of network connectivity at any given time. When selecting a network or after making changes, make sure to wait three minutes for connectivity to be confirmed. - Page 36 Mystic Tan Kyss™ Owner’s Manual Solution 3: If the other solutions do not identify the problem, attempt to connect via the unused media. If you use wireless, try connecting with a hardwire, and if you use a hardwire, ty connecting via wireless.
-
Page 37: T2. Session Not Starting- Cartridge Label Not Displayed
Mystic Tan Kyss™ Owner’s Manual During troubleshooting, if a component does prove to be faulty, contact tech support at (855) 450-3500 for replacement parts or further support. In the meantime, use the alternate network connection method until the issue may be remedied. -
Page 38: T4. Sump Not Draining
Mystic Tan Kyss™ Owner’s Manual Solution 2: If the rinse does not start after ensuring the door is closed, check the Home screen for messages (Blue Settings gear icon on Home screen indicates a message). If a message is identified, take any necessary action, and try again. - Page 39 Mystic Tan Kyss™ Owner’s Manual Bleed-off Valve External Compressor Filter Compressor The compressor (shown at left) is located toward the base of the booth in the same column as the touchscreen. Remove the panel to access the compressor. Adjust the bleed-off valve to regulate the compressor PSI.
-
Page 40: T6. Updating Software Via Usb
Mystic Tan Kyss™ Owner’s Manual T6. Updating Software via USB Software improvements are periodically available to update the functionality and capability of the booth. While the booth will ship with the most up-to-date version available, updates may be made available overtime. The Kyss has two software elements: those for the controls and those for the touchscreen. -
Page 41: T7. Audio And Sd Card Faults
Mystic Tan Kyss™ Owner’s Manual Press the “Update via USB” button in the Staff > Settings page. Newer versions of the software may use the “Update via OTA” which does not require the USB. T7. Audio and SD Card Faults... -
Page 42: Appendix 1: Faults
The Gear icon on the Home screen turned blue to indicate a message, the email notifications, and the booth reporting an error to Sunless Inc. technical support. Each of these is discussed below. -
Page 43: Email Notifications
Page Mystic Tan Kyss™ Owner’s Manual Press the Settings gear icon Staff > Messages page to review any recorded faults. Pressing the Setting gear icon will take you directly to the Staff > Messages screen and display a list of any recorded messages. -
Page 44: Fault Severity
Mystic Tan Kyss™ Owner’s Manual Email addresses are added here. If the field is left blank, only Sunless Inc. tech support will be notified. If using ONE email address, simply enter the address as example@email.com If using TWO email addresses separate with a comma as shown address1@email.com, address2@email.com... -
Page 45: Fault Codes And Descriptions
Mystic Tan Kyss™ Owner’s Manual manually ended. Orange faults may result from failure to perform routine maintenance, incorrect usage, improper draining, or internal communication errors. Red Faults are indicators of some component or action that caused the booth to end its current operation. -
Page 46: Orange Faults
Mystic Tan Kyss™ Owner’s Manual • Make sure voltage setting on the machine is set to closest voltage at the wall Top heater has low output during session - Top heater current is low, which will reduce heater current below 0.5 amp performance. -
Page 47: Red Faults
Mystic Tan Kyss™ Owner’s Manual Session cancelled with liquid remaining in Displays the current volume in reservoir (scale of 1-19) reservoir- (current reservoir level) after a session was manually cancelled. Ignores values 2 or below. • Purge solution out before inserting new cartridge •... - Page 48 Mystic Tan Kyss™ Owner’s Manual • If no obstructions, replace horizontal motor Vertical motor current below minimum Vertical motor current under powered. Session will be mA during enable cancelled. • Check Vertical Motor fuse on DC board • Check voltage at motor (24V DC) •...
-
Page 49: Appendix 2: Technical Diagnostic Output Tolerances
Mystic Tan Kyss™ Owner’s Manual Appendix 2: Technical Diagnostic Output Tolerances The Technical > Diagnostic outputs screen provides significant data about the various booth systems during operation. Below are the recommended range tolerances for the various systems. If a displayed value deviates from the range shown, there could be a problem with the component. -
Page 50: Appendix 3: Quick Start Staff Guide
Mystic Tan Kyss™ Owner’s Manual Swivel Motor (spike)** Low Value Target Value High Value Swivel Motor mA 0.12 0.16 0.19 Swivel Motor (operating)** Low Range Target Range High Range Swivel Motor mA 0.05-0.11 0.07-0.14 0.08-0.16 Appendix 3: Quick Start Staff Guide There is a wide selection of Myxer additives to enhance your tan. -
Page 51: Prepare The Booth
Mystic Tan Kyss™ Owner’s Manual Prepare the Booth While preparing the solution, or after it is prepared, start the booth to begin the warm up cycle so the tanner has a comfortable and inviting environment when entering. If the booth is... -
Page 52: Start The Session
Mystic Tan Kyss™ Owner’s Manual Insert cartridge as shown. The indented slot Notice the on the cartridge label faces faces the back. forward. The barcode reader will identify the solution in the receptacle and display the solution name to the right of the solution level indicator. - Page 53 Mystic Tan Kyss™ Owner’s Manual Once the session begins, the voice prompts will guide the user through the tanning process. The process has only two stances: a front spray and a back spray. During both stances, the user will stand on the designated foot pads and follow the prompts.
-
Page 54: Appendix 4: Maintenance Checklists
Mystic Tan Kyss™ Owner’s Manual Appendix 4: Maintenance Checklists DO NOT ATTEMPT THESE ACTIVITIES WITHOUT FIRST REFERRING TO THE MANUAL FOR SPECIFIC INSTRUCTIONS IN EACH CATEGORY. FAILURE TO FOLLOW INSTRUCTIONS CAN LEAD TO INJURY OR DAMAGE TO THE BOOTH. Checklists are on the following pages... - Page 55 Mystic Tan Kyss™ Owner’s Manual Daily Maintenance Checklist DO NOT ATTEMPT THESE ACTIVITIES WITHOUT FIRST REFERRING TO THE MANUAL FOR SPECIFIC INSTRUCTIONS IN EACH CATEGORY. FAILURE TO FOLLOW INSTRUCTIONS CAN LEAD TO INJURY OR DAMAGE TO THE BOOTH.
- Page 56 Mystic Tan Kyss™ Owner’s Manual Weekly and Monthly Maintenance Checklist DO NOT ATTEMPT THESE ACTIVITIES WITHOUT FIRST REFERRING TO THE MANUAL FOR SPECIFIC INSTRUCTIONS IN EACH CATEGORY. FAILURE TO FOLLOW INSTRUCTIONS CAN LEAD TO INJURY OR DAMAGE TO THE BOOTH.
Need help?
Do you have a question about the Mystic Tan KYSS and is the answer not in the manual?
Questions and answers
The sensor is flashing but does nothing when you wave your hand in front of it
If the sensor on the Sunless Mystic Tan KYSS is flashing but not responding to hand movements, it means one or more required conditions have not been met. These conditions include: the booth must be started, the solution reservoir must have solution, the cartridge must be placed in the receptacle, and the receptacle must be closed. If any of these are missing, the sensor will not activate even if it is flashing.
This answer is automatically generated