Table of Contents
Advertisement
Quick Links
USER GUIDE
The Muse
Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
PREPARATION
Please read instructions thoroughly before installation
and keep them for future reference.
Improper assembly can undermine the safety and
longevity of the product.
IMPORTANT
All packaging must be removed and bulb carefully
screwed in before turning on.
The product is designed to work with the Tala 12V LED
bulb provided. Do not use alternative bulb as product
will not work effectively. For replacements, visit the
Tala website or contact us for assistance.
Avoid turning on product in hot temperatures above
35ºC. Doing so will reduce lumen output and bulb
lifespan.
To reduce risk of scratches or marking, ensure bulb is
fully housed in the glass case unless changing the bulb.
WARNING
The Muse is not suitable for recessed or enclosed fixtures
or environments, and should be displayed as instructed.
Do not leave the product under direct sunlight while
switched on.
Ensure all fixings are tightly sealed and do not allow
internal components and surfaces to be exposed to water.
SKU - FB-MUSE-PBL-CW-01
SKU - FB-MUSE-PBL-HB-01
SKU - FB-MUSE-PBL-PG-01
SKU - FB-MUSE-PBL-PR-01
Scan me for more
technical help
IP44
E27 12V
USB TYPE-C 5V
Advertisement
Table of Contents
Related Manuals for Tala The Muse
Summary of Contents for Tala The Muse
- Page 1 All packaging must be removed and bulb carefully screwed in before turning on. The product is designed to work with the Tala 12V LED bulb provided. Do not use alternative bulb as product will not work effectively. For replacements, visit the Tala website or contact us for assistance.
- Page 2 THE MUSE - PROVIDED COMPONENTS x1 The Muse luminaire with LED bulb x1 2mm Hex Key x1 USB Type-C Charging cable Handle 12V LED bulb Dimmer dial Base Battery charge level button USB Type-C power input Battery charge level Indicator lights...
-
Page 3: Initial Setup
INITIAL SET UP STEP 1 Release the two screws the lid with the provided Hex key and remove the handle STEP 2 Lift off the lid and carefully remove the packing material from inside. - Page 4 STEP 3 Ensure the bulb is screwed in fully and contact is made between the base of the bulb and the housing. The bulb and housing are both safe to touch. Be careful to align the bulb properly and do not over-tighten. Contact point STEP 4 Return the lid and handle back into...
- Page 5 STEP 5 To turn on, rotate the dial on the front of the lamp clockwise until the bulb lights up. Adjust the dimmer for your desired light output. Dial the dimmer up for a cool white light, and dial down for a warm, ambient colour temperature.
-
Page 6: Option 2: Wireless Charging
CHARGING THE MUSE OPTION 1: WIRED CHARGING Insert the provided USB Type-C charging cable into the input at the back of the lamp base and plug into a USB Type-A adapter. For optimum charging, use the 0.5m charging cable provided and a 2-Amp USB Type-A adapter. -
Page 7: Battery Level Indicator
- Avoid letting The Muse reach 0% battery, when the low battery indicator starts blinking, it should be recharged - When not in use, store The Muse with between 25-50% battery (1-2 indicators on) - During charging, make sure The Muse is uncovered to avoid over-heating... -
Page 8: Care And Cleaning
Tala Europe B.V, Bertus Aafjeshove 40, Nieuwegein 3437JN, Netherlands Tala North America, Inc. P.O. Box 89 1051, Port Washington Blvd. Port Washington, NY 11050, USA NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.