InFocus LP425z User Manual page 23

U s i n g t
16
h e P r o
Standby
When you press
blank screen is displayed for 15 minutes. You can change the
amount of time the projector stays in standby mode; see
"Standby Time" on page 23 for details.
If you press
•
returns to normal operations immediately.
If you press
•
30 second delay before the lamp turns back on.
If you don't press
•
minutes.
Volume
To increase the volume, press
•
To decrease the volume, press
•
Volume adjustments are saved for each source you have con-
nected.
j e c t o r
, the display and audio turn off and a
standby
again within 15 minutes, the projector
standby
again after 15 minutes, there is about a
standby
again, the lamp turns off after 15
standby