InFocus LP425 Installation Instructions

Infocus lp425: installation instruction

Hide thumbs Also See for LP425:

Download this manual See also: User Manual, Installation Manual

Step 1

Invert the projector and place it on a flat surface. Loosely install the two ( 2 ) quick release sleeves in to the mounting

holes found on the bottom of the projector using the two ( 2 ) 4mmx16mm knurl knobs ( supplied ). Align the keyholes in the

mounting bracket to the quick release sleeves and lower it to sit on the sleeves. Slide the bracket to the back of the projector

until the knurl knob hole lines up with the mounting hole on the bracket. Secure using the 4mmx8mm knurl knob. (Supplied)

( Do not over tighten! ).

Step 2

Install the base box securely to the ceiling structure in accordance with proper commercial standards.

Use ( commercially available ) suitable hardware depending on the installation requirements.

NOTE: If (Optional) AST-2446 adjustable height suspension adapter is a part of the installation, securely install

the adapter to the ceiling at this time. ( Refer to its installation instructions. )

Installation Instructions

SP-CEIL- LM-425

27700B S.W. Parkway Ave.

Wilsonville, Oregon 97070-9215

Phone 1-800-294-6400 Fax 1-503-685-888

www.infocus.com

Page 1: Installation Instructions
Invert the projector and place it on a flat surface. Loosely install the two ( 2 ) quick release sleeves in to the mounting holes found on the bottom of the projector using the two ( 2 ) 4mmx16mm knurl knobs ( supplied ). Align the keyholes in the mounting bracket to the quick release sleeves and lower it to sit on the sleeves.
Page 2 Check all the hardware for proper tightness and security. NOTE: Projector can be removed quickly for portable use by; 1). Remove the knurl knob screw. 2). Hold the projector with two hands and slide backwards to detach the sleeves from keyhole. Reverse the process for a quick reinstall.

Sp-ceil-lm-425