Table of Contents
Advertisement
Quick Links
smartLEDs
SMART STAIR LED LIGHTING CONTROLLER
Download the full-color version of this manual from magicstairlighting.com, tab DOWNLOADS,
where you will also find a comprehensive guide to installing smart stair LED lighting system.
In accordance with the provisions of the Directive 2012/19/EU on waste electrical and electronic equipment (WEEE) it is
forbidden to place with other waste any waste equipment marked with a crossed-out bin symbol.
The user, wanting to get rid of electronic equipment or services, is obliged to return it to a waste equipment collection point.
Applicable restrictions have been introduced on order to restrict the amount of waste generated from waste electronic
equipment.
This equipment does not contain any hazardous ingredients that may have a particularly negative impact on the environment
and human health.
© APACHETA SMART SYSTEMS
smartLEDs
S19-P
model PREMIUM
USER MANUAL
v5.0.6
magicstairlighting.com
Advertisement
Table of Contents
Related Manuals for APACHETA smartLEDs PREMIUM S19-P
Summary of Contents for APACHETA smartLEDs PREMIUM S19-P
- Page 1 Applicable restrictions have been introduced on order to restrict the amount of waste generated from waste electronic equipment. This equipment does not contain any hazardous ingredients that may have a particularly negative impact on the environment and human health. © APACHETA SMART SYSTEMS magicstairlighting.com...
- Page 2 integrated dusk switch (IDS) which disables the controller during daylight, with a light sensor that can be installed both indoors and outdoors. 2 DESCRIPTION 2.1 Terminals The controller’s terminals are depicted below. str. 2/15 © APACHETA Smart Systems...
-
Page 3: Power Supply
The light sensor may work both outdoors and indoors, which makes it more convenient than external dusk sensors that work properly only when exposed to natural sunlight (any artificial light sources can cause malfunction of external dusk sensors). © APACHETA Smart Systems str. 3/15... - Page 4 (depending on the setting of the Off direction parameter). The Master lamp (if set) is turned off last. The smoothness of the turning off is the same as in the case of turning on, and set with the Smoothness parameter. str. 4/15 © APACHETA Smart Systems...
-
Page 5: Configuration Manual
The configuration parameters are stored in the non-volatile memory (also after the device is switched off). The controller is shipped with the parameters preset to default values (see Table 1). The parameters can be set in accordance with Table 1. © APACHETA Smart Systems str. 5/15... - Page 6 CAUTION! Changing the parameters indicated as ‘[advanced]’ substantially affects the operation of the controller, and it is recommended to change these with caution. 3.4.1 Number of lamps The number of all the LED lamps (including the Master lamp). str. 6/15 © APACHETA Smart Systems...
- Page 7 The stand-by backlight value of the Master lamp (expressed as a percentage of the Master brightness parameter). CAUTION! While setting this parameter, the last lamp (L19) is lit with a brightness corresponding to this parameter. © APACHETA Smart Systems str. 7/15...
- Page 8 Similarly for the RESTORE option: the configuration process will be halted and the factory settings brought back. CAUTION! To confirm the selected option (SAVE, QUIT, or RESTORE), press the SET button and hold for at least 4 s until both signalling diodes turn off. str. 8/15 © APACHETA Smart Systems...
- Page 9 CONSTANT pace of turning on/off of consecutive lamps is constant SPEED-UP pace of turning on/off of consecutive lamps speeds up Off direction BACKWARD not flashing turning off in opposite direction as © APACHETA Smart Systems str. 9/15...
- Page 10 40% max brightness 40% max brightness 60% max brightness 70% max brightness 80% max brightness 90% max brightness 100% 100% max brightness Master backlight not flashing no backlight lighting 2% Master brightness 5% Master brightness str. 10/15 © APACHETA Smart Systems...
- Page 11 6s warning time: 9s warning time: 12s warning time: 18s warning time: 24s Waiting time not flashing no waiting 0,4s waiting time: 0,4s waiting time: 1s waiting time: 2s waiting time: 3s © APACHETA Smart Systems str. 11/15...
- Page 12 – quit configuration without saving new settings RESTORE SET pressed >4s (until GREEN diode stops blinking) – restore factory settings and finish configuration normal function free free „+” „-” and SET buttons released str. 12/15 © APACHETA Smart Systems...
-
Page 13: Technical Specifications
L1 to L19, and after about 30 seconds from the end of the detection by the sensor, the lights should smoothly dim (to the backlight level). © APACHETA Smart Systems str. 13/15... - Page 14 DELTA sensors and LED lamps (typically 12 VDC) o automatic turning on the lights by DELTA sensors o option: permanent steady lighting with additional switches o blocking the controller during daylight with a built-in dusk switch. str. 14/15 © APACHETA Smart Systems...
- Page 15 S19-P User manual v5.0.6 © APACHETA Smart Systems str. 15/15...
Need help?
Do you have a question about the smartLEDs PREMIUM S19-P and is the answer not in the manual?
Questions and answers