Fisher & Paykel WashSmart MW60 Getting Started

Hide thumbs Also See for WashSmart MW60:

Getting started quickly — WashSmart washer

Failure to follow the advice in this guide may result in damage to your garments, and your expectations of wash

performance may not be met.

Before you start

• It is important to sort your clothes, particularly separating white/light colours from dark colours, as well as

separating out sheets and towels (refer to

• Wash new, highly coloured and dark coloured items separately to prevent dye transfer onto other items.

• Sort lint givers and lint collectors (refer to the 'Sorting').

• Close bra clasps, do up zippers and check pockets.

• Place your clothes directly into the wash bowl.

• Place the load evenly around the agitator (refer to

• Remove fabric softener dispenser cup.

• Follow the manufacturer's instructions on the detergent

package.

• Use the size of the load as a guide to the amount of

detergent to use (refer to the 'Detergent' section).

• Pour the detergent down the centre of the agitator stem.

• Replace the fabric softener dispenser cup (this stops small

articles falling down the centre of the agitator).

https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/QuickSmart/MW60/User_Guide_MW60/05_Getting_started_quic...

'Sorting and

Loading').

'Sorting and

Loading').

Updated: Thu, 11 Nov 2021 20:19:17 GMT

Table of Contents

Do you have a question about the WashSmart MW60 and is the answer not in the manual?

Page 1 Getting started quickly — WashSmart washer Failure to follow the advice in this guide may result in damage to your garments, and your expectations of wash performance may not be met. Before you start • It is important to sort your clothes, particularly separating white/light colours from dark colours, as well as separating out sheets and towels (refer to ‘Sorting and Loading’).
Page 2 Fabric softener If you wish to use fabric softener, place it in the fabric softener dispenser cup on the top of the agitator (refer to the ‘Fabric softener’ section). Fabric softener must not be used if you have selected the ‘Quick’...
Page 3 to start the cycle. The washer will start to fill with water and select the correct wash action for your load. For best fabric and colour care, remove your clothes as soon as the cycle has finished. 6. ‘Delay Start’ allows you to delay the start of your wash by 1, 3 or 9 hours (refer to the ‘Wash options’...