Advertisement
Quick Links
SamsGazebos
4
6
Thank you for purchasing a Japanese Myojin Style Torii Gate from SamsGazebos. Assembling it may take 45 minutes and an
hour to set with cement. Minimum two persons are recommended to assemble this item for your safety. Please work on a
clean level floor for the best result. Remove the wrapping material, prepare the tools and material, and lay out the parts before
assembly in order to save you me and effort. Each kit is custom built with pilot holes for your convenience. Wash hands a er
handling.
Tools / things you need:
◇ Cordless Screw Driver or Philips Screw Driver(+)
◇ Socket Wrench
◇ 2 Hammers
◇ Level
◇ Ladder
◇ Square
◇ Knife
◇ Pencil / Pen
◇ Measure Tape
◇ Shovel
◇ Minimum 4 bags of ready mix cement
◇ Wheelbarrow or container to mix cement
◇ Water
◇ Nitrile Gloves (included)
◇ 2 Strings (included)
◇ Hardware (two 1/2" x 7"lag bolts with washers, four large screws (2-1/2"), six small screws (1-5/8"), are six nails ( included)
○
R
Japanese Myojin Style Torii Gate
Assembly Instructions & Installation Guide
5
3
2
1 HASHIRA
7
Extra
NUKI
wood
(2)
Board
Top KASAGI
Bo om KASAGI
(3)
Made in USA
Four KUSABI (6)
GAKUZUKA (4)
Two Cement
Frames (7)
(5)
Advertisement
Related Manuals for SAMSGAZEBOS Japanese Myojin Style Torii Gate
Summary of Contents for SAMSGAZEBOS Japanese Myojin Style Torii Gate
- Page 1 Bo om KASAGI Thank you for purchasing a Japanese Myojin Style Torii Gate from SamsGazebos. Assembling it may take 45 minutes and an hour to set with cement. Minimum two persons are recommended to assemble this item for your safety. Please work on a clean level floor for the best result.
- Page 2 Square *VERY IMPORTANT* Check which side is in or out and mark them Minimum hole dimen- accordingly. sions : 12” W x 12”L x 18” D 1. Making two holes for Torii poles. Remember that you 2. Place poles with a hole at top and check which side is in need to set minimum 6”...
- Page 3 Bo om KASAGI GAKUZUKA NUKI 7. Alterna vely, you can also do the step 6 with the Torii 8. Fit a GAKUZUKA (wider side at top) between the bo om on the ground. KASAGI and NUKI. 9. Slide out the NUKI half way to let the GAKUZUKA fit in. 10.
- Page 4 13. Do the same for the other side of the NUKI. 14. Put the Top KASAGI. 16. Insert cement frames and e them to the NUKI. 15. Fasten the Top KASAGI and Bo om KASAGI with small screws. Nail the GAKUZUKA and the NUKI. 17.
- Page 5 ○ ○ will look same for 5 to 10 years. Behr brand solid deck stain is available at Home Depot ○ Thank You for choosing SamsGazebos Customer service: 1(800)376-7267 Another web site is just launched, www.SamsGazebo.com. We appreciate your business.
- Page 6 ○ SamsGazebos Japanese Myojin Style Torii Gate Care and Use info@samsgazebos.com 1(800) 376-7267 Torii CARE AND USE This product is made for a gate. This is not a structure to climb. Do not leave it without permanent installation. This product is treated with oil-based semi-transparent brown wood preserva ve. The color of the wood preserva ve is not permanent, will show trace of green from Copper, and turn to light brown over me.
- Page 7 ○ SamsGazebos Japanese Myojin Style Torii Gate Parts List info@samsgazebos.com 1(800) 376-7267 1 Top Kasagi 1 Bo om Kasagi 1 Nuki 4 Kusabi 1 Gakuzuka 2 Hashira 2 Cement Frames...
Need help?
Do you have a question about the Japanese Myojin Style Torii Gate and is the answer not in the manual?
Questions and answers