Cable Management; Hiveos Installation; Congratulations - OCTOMINER X8 ULTRA System Quick Start Manual

7.
Every cable has a DIFFERENT LENGHT.
After the graphics cards are firmly connected and fastened take the bundle of the black
tip PCIE cables and stretch them out. Start from the shortest cable and connect it to the
backplane in the port labeled as "1". Continue with the next longest in order from right
to left and bottom to top. Cable labeled as "8" is the longest.
8.
Manage the cables and make sure once more that there is nothing obstructing the system
fans on the front. Close the lid and connect power, VGA, LAN and any pheripherals.
Boot the system by pressing the power button on the front or rear.
9.
Our system comes installed with HiveOs by default. For any questions on using HiveOS,
refer to HiveOS quick start guide found here:
https://hiveos.farm/getting_started-quick_install/
For OCTOMINER HiveOS integration, look for the HiveOS integration manual on our
manuals page.

Congratulations!

You are off and running! OCTOMINER™
you in any way we can.
X8 ULTRA is a trademark of OCTOMINER™
Support Engineers are always available by email to assist
OCTOMINER™
www.octominer.com
info@octominer.com