OCTOMINER X8 ULTRA System Quick Start Manual
  1. Manuals
  2. Brands
  3. OCTOMINER Manuals
  4. Media Converter
  5. X8 ULTRA
  6. System quick start manual

OCTOMINER X8 ULTRA System Quick Start Manual

Hide thumbs
1
2
3

Advertisement

Table of Contents

X8 ULTRA
OCTOMINER™
System Quick Start Guide
Welcome
Thank you for purchasing the OCTOMINER™ X8 ULTRA™ mining system.
This guide will help you set up the system and troubleshoot the most common
issues you might encounter.

Initial testing and set up

The system has been pre assembled and tested to be in working condition. There are
a few simple steps to inserting your graphics cards, connecting IO and power.
1.
Open the lid by unscrewing 2 on the back, then press down on the quick release buttons on the
front top of the case and slide the lid in the direction shown by the arrow.
2.
Inspect visually that there are no obstructions in the front panel fans, e.g. cables.
3.
Insert a CR3032 CMOS battery to the motherboard.
4.
Connect the rear panel VGA to a monitor, a LAN cable to the ethernet port and
optionally a usb device like a keyboard to the rear or front panel USB port. Lastly connect the
provided power cable to the C14 port of the power supply to boot the system.
from the PDU (Power Delivery Unit in order to make sure that the power supplies power up at the
same time.
Turn on the power

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X8 ULTRA and is the answer not in the manual?

Questions and answers

Related Manuals for OCTOMINER X8 ULTRA

Summary of Contents for OCTOMINER X8 ULTRA

  • Page 1 X8 ULTRA OCTOMINER™ System Quick Start Guide Welcome Thank you for purchasing the OCTOMINER™ X8 ULTRA™ mining system. This guide will help you set up the system and troubleshoot the most common issues you might encounter. Initial testing and set up The system has been pre assembled and tested to be in working condition.
  • Page 2 Wait for the system to initialize, until you see the OCTOMINER™ boot logo. Make sure the OLED display works, test the usb port by typing on the keyboard (for example hit DEL key to enter the system BIOS), see that the wired ethernet lights turn on and there is video out on your monitor.
  • Page 3 Our system comes installed with HiveOs by default. For any questions on using HiveOS, refer to HiveOS quick start guide found here: https://hiveos.farm/getting_started-quick_install/ For OCTOMINER HiveOS integration, look for the HiveOS integration manual on our manuals page. Congratulations! You are off and running! OCTOMINER™...

Table of Contents