PALECEK Adrift Coco 194041 Mounting Instructions

PALECEK Adrift Coco 194041 Mounting Instructions

Wall decor

Advertisement

These instructions are provided for your convenience. It is very important that they are read
carefully and completely before beginning installation of this item.

Tools Needed:

Drill, Phillips head screw bit, Measuring tape, Hammer, Bubble Level, Pencil

Parts List:

A)
Wall Decor x 1 pc
B)
22.75" Female Wood Cleat x 1 pc
C)
Wall Screws x 3 pcs
D)
Wall Anchors x 3 pcs

To Assemble:

1.
Remove all parts and hardware from the box along with any plastic protective packaging. Do not discard
contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
2.
Place components on a non-scratching surface.
3.
Determine the desired orientation of the wall decor. Wall decor is equipped with 4 Male Wood Cleats for
horizontal or vertical hanging.
4.
Using the Female Wood Cleat, position cleat on wall in desired location and mark the hole locations on the
wall with pencil.
NOTE: It is strongly recommended to install cleat with screws attaching directly into wall studs.
5.
Use bubble level to ensure level positioning.
6.
Using the drill, pre-drill holes at marked locations.
NOTE: If wall decor location will be installed in sheet rock or masonry, use appropriate drill bit size to
accommodate wall anchors at locations between wall studs. Using a hammer, gently tap anchors into the holes
until they are flush with the wall. Anchors provided are for sheetrock. For masonry anchors, consult your local
hardware store.
7.
Place Female Wood Cleat over hole locations and insert screws accordingly.
8.
Tighten screws firmly. Do not overtighten.
9.
Lift the wall decor, align the Male and Female Wood Cleats, then slide downwards firmly until cleats engage.
10.
Installation is complete.

Care Instructions:

MOUNTING INSTRUCTIONS
Adrift Coco Wall Decor, White
(B)
(C)
(D)
Dust with a soft, dry cloth. Do not use abrasive cleaners
T. 800.274.7730 | F. 510.234.7234 | PALECEK.COM
194041
Female
(A)
Male
Cleat
Cleat
Side view of cleat engagement
(A)
Back view of wall
decor

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Adrift Coco 194041 and is the answer not in the manual?

Questions and answers

Summary of Contents for PALECEK Adrift Coco 194041

  • Page 1 Lift the wall decor, align the Male and Female Wood Cleats, then slide downwards firmly until cleats engage. Installation is complete. Care Instructions: Dust with a soft, dry cloth. Do not use abrasive cleaners T. 800.274.7730 | F. 510.234.7234 | PALECEK.COM...

Table of Contents