MAINTENANCE
MAINTENANCE
MAINTENANCE
MAINTENANCE
AUTOMATIC BELT TURNBUCKLE
AUTOMATIC BELT
AUTOMATIC BELT
AUTOMATIC BELT
If necessary the spring tension must be insreased by means of lever A (Fig.19)
Check the spring tension:
after the first ½ hour of work
•
after the first 8 working hours
•
every 20 working hours
•
CUTTERS
CUTTERS
CUTTERS
CUTTERS
Check daily that thereare no broken cutters.
If there are, replace it with the one diametrically opposite, in order to maintain
a correct tractor balance.
Do not wait until the cutters are excessively worn before replacing, as it causes:
morepower to be used
•
vibrations thatare detrimental to the rotating parts of the shredder
•
- - - -
COUNTER
COUNTER
COUNTER
COUNTER
CUTTER
CUTTER
CUTTER
CUTTER
Regularly check its condition and clean, especially when the vegetation is damp.
S S S S
TORAGE
TORAGE
TORAGE
TORAGE
Before storing the machine:
wash it thoroughly
•
check the parts subject to wear (cutters, belts)
•
spray a fine film of oil or diesel over the entire machine to protect it
•
against rust
TURNBUCKLE
TURNBUCKLE
TURNBUCKLE
35
A A A A