Working Height - Omarv TFR 180 Use And Maintenance Manual

WORKING HEIGHT

WORKING HEIGHT
WORKING HEIGHT WORKING HEIGHT
This is determined by the height of the roller or the rear wheels and by the
lower hoist arms of the tractor.
The haulm shredder must remain horizontal.
The cutters must not be in contact with the ground. It is advisable not to go
down lower that 3cm from the ground. When the optimum field cutting height
is established, regulate the height of the slides, if they are included, to 1cm
lower than the cutters in order to avoid that they come into contact with the
ground.
C C C C ! ! ! ! These operations must be undertaken slowly with the greatest care in
AUTION AUTION
AUTION AUTION
compliance with the safety regulations laid down in this manual.
Fig.7: position of the cutters, the slides and the wheels in relation to the ground
H: minimum cutting height 3cm
h: minimum slide height 1cm
26