ROCWARE S170U Quick Start

S170U 4K Ultra HD USB Camera Quick Start
1
Appearance and Connection
2
Packing List
Name Quantity
Camera 1
USB Cable 1
3
Product Features
4K Ultra High Definition
Support 4K ultra high definition, ultra high definition with ultra high resolution,
the maximum can provide 4K@30fps/25fps image output, while down
compatible with 1080P, 720P and other resolutions.
USB 3.0
Full function USB 3.0 interface, power supply, video, audio in one, it also
can support one channel of the USB video signal source.
Wide Angle without Distortion Lens
Wide angle field of view up to 84°(Support Auto Focus) and 120°, small lens,
wide vision. At the same time support EPTZ, with unmovable brake, more
larger, more clear.
Built-in Microphone
With a built-in microphone array, you can pick up a full range of sounds, and
pick up the sound distance up to six meters. The unique noise suppression
algorithm makes your voice perfect.
Low Light
The application of 2D and 3D noise reduction algorithm greatly reduces the
image noise. Even under the condition of ultra-low illumination, it still keeps
the picture clean and clear, and the SNR of image is as high as 55dB.
Easy Installation
Standard damping rotary shaft support, suitable for market 100% monitor,
easy installation, stable and reliable.
Name Quantity
Remote Control 1
Quick Start 1
4
Remote Control
No. Name
1 Standby Key
2 Number Key
3 *Key
4 Preset Key
5 HOME Key
6 Return Key
7 Zoom Button
Left/Right
8
Setting Key
9 Focus Key
10 Selection Key
11 #Key
IR Remote
12
Control Key
13 Reset Key
14 PTZ Control key
15 Menu Key
16 Backlight Key
17 PTZ Reset Key
Function Description
Enter into standby mode by pressed it
Preset setting or transfer preset
Equipped with other keys for using
Preset: Setting Preset + Number key (0-9)
Confirm menu or the PTZ will back to the
middle position after pressed it
Return back the last level menu
Making the lens wide angle/narrow angle
slowly or quickly
 Standard: Simultaneously press
Left/Right setting key + 1 (horizontal)
 Reverse: Simultaneously press
Left/Right setting key + 2 (horizontal)
auto/manual/far-end/near-end focus
Select the camera need to control
Need to equipped with other key
[*+＃+F1/F2/F3/F4]: NO.1/2/3/4 address
Delete preset (reset key + corresponding
preset number key)
PTZ moved according to the arrow indicates
Enter or exit OSD Menu after pressed it
Turn on/off backlight consumption (loop)
Only applicable to the PTZ camera