Navigational Equipment - Nauticstar XTS Series Owner's Manual

XTS SERIES OWNER'S MANUAL
Automatic Charging Relay (ACR)
The NauticStar XTS series is equipped with a Blue Sea Systems M-ACR. The Mini Automatic Charging Relay (M-ACR) is
designed to manage the charging current from alternators up to 65 Amps found on most outboards and many inboard
engines. Start Isolation (SI) protects sensitive electronics by temporarily isolating house loads from the engine circuit
during engine cranking, protecting the house circuit from voltage sags and spikes. Additional information can be obtained at
the manufacturer's website available at:
https://www.bluesea.com/
Breakers
The helm face switch panel comes equipped with an integrated breaker system. The breakers are located just under the
switch and are protected by a rubber nipple. When tripped, the breaker will deploy a small rod into this rubber nipple. To
reset the circuit breaker, press down onto the rubber nipple and push the rod back into the circuit. Before resetting a
circuit breaker, inspect the circuit and determine the cause of the trip.
Wiring Diagrams
Wiring diagrams can be found on the NauticStar website. Available at:
https://nauticstarboats.com/downloads/

NAVIGATIONAL EQUIPMENT

Compass
The NauticStar XTS has an optional compass. If equipped, this compass will be located on the top of the console just above
the gauges.
Horn
All NauticStar boats come factory equipped with a Coast Guard compliant horn. The horn can be activated by toggling the
switch labeled "Horn" located on the switch panel.
66 |
XTS SERIES P a g e